“Oracle Other Certification “, also known as 1z0-211 exam, is a Oracle certification.
Preparing for the 1z0-211 exam? Searching 1z0-211 Test Questions, 1z0-211 Practice Exam, 1z0-211 Dumps?

With the complete collection of questions and answers, Test4actual has assembled to take you through 122 Q&A to your 1z0-211 exam preparation. In the 1z0-211 exam resources, you will cover every field and category in Oracle Other Certification helping to ready you for your successful Oracle Certification.

Free 1z0-211 Demo Download
Test4actual offers free demo for Oracle Other Certification 1z0-211 exam (Oracle 11i general ledgerfundamentals). You can check out the interface, question quality and usability of our practice exams before you decide to buy it. We are the only one site can offer demo for almost all products.

Exam Details
The Oracle Other Certification exam is the qualifying exam available to candidates pursuing a single-exam option for the Oracle Certified Network Associate Oracle Other Certification certification. The Oracle Other Certification (1z0-211) exam will test materials from the new Interconnection Oracle Network Devices (ICND) course as well as the new Introduction to Oracle Networking Technologies (INTRO) course. The exam will certify that the successful candidate has important knowledge and skills necessary to select, connect, configure, and troubleshoot the various Oracle networking devices. The exam covers topics on Extending Switched Networks with VLANS, Determining IP Routes, Managing IP traffic with Access Lists, Establishing Point-to-Point connections, and Establishing Frame Relay Connections.

http://www.test4actual.com

FREE DEMO:
1.Which two statements would be true when helping a customer make implementation decisions
for General Ledger? (Choose two)
A.Integration issues can be minimized.
B.Cost of upgrades would not be affected.
C.Patching cannot be done on a customized implementation.
D.Training can be standardized when Oracle is implemented without customization.
E.All Oracle subledger journals go directly to General Ledger to overcome interface problems.
Correct:A D
2.Revenue accounts can be viewed only by the head of the Finance team, who has a GL Superuser
responsibility. She has successfully created a standard Profit and Loss statement for the company.
Another member of the department with a General Ledger Supervisor responsibility has been
asked to run the standard Profit and Loss statement for Feb06.
The report shows only the
expenses accounts. Which two steps should she perform so that the Profit and Loss statement
will run successfully? (Choose two.)
A.Recreate the Profit and Loss under her own responsibility.
B.Ask to have security removed from her responsibility.
C.Perform an online
inquiry to get the revenue balances.
D.Ask to have the profile option FSG: Enforce Segment Value Security changed to No.
Correct:B D
3.In creating a report, what is true about the column set? (Choose two.)
A.Formats can be set for each column.
B.Accounts cannot be assigned to a column set.
C.Calculations can be performed using columns.
D.Seeded column sets provided by Oracle must be used.
Correct:A C
4.Select the two minimum set up steps for intercompany accounting. (Choose two.)
A.Define a clearing company for all manytomany
intercompany journals.
B.Include an Intercompany segment in the chart of accounts structure.
C.Enable the Intercompany Qualifier for the Intercompany segment.
D.Enable Balance Intercompany Journal when defining the set of books.
E.Set up intercompany accounts for every journal source and journal category for intercompany
transactions.
F.Set up intercompany accounts for journal source and journal category of Other.
G.Define a value set for the Company and Intercompany segments.
H.Define a journal source and a journal category for Intercompany.
Correct:D F
5.Select the three true statements about mapping rules. (Choose three.)
A.A rollup rule tells General Ledger what detail level of information to transfer and how to roll that
information up to the parent.
B.There are only three rollup rules: 1. Transfer Level Detail Using Detail Ranges; 2. Transfer Level Detail Using Parent; 3. Transfer Level Summary Using Parent
C.You can define a combination of segment values and account rules.
D.There are only two mapping rule actions: 1. Copy Value from; 2. Assign Value from
E.Mapping sets enable you transfer data from multiple subsidiaries simultaneously.
Correct:A C E

http://www.test4actual.com/1z0-211.html

6.XYZ Corporation has two sets of books and six inventory organizations. What is the minimum
number of times that XYZ needs to run the general ledger interface in order to close the inventory
at the end of each accounting cycle?
A.2
B.4
C.6
D.8
E.10
F.12
Correct:C
7.XYZ Company has many Financial Statement Generator reports created to produce Profit & Loss
statements and Balance Sheet reports. Occasionally XYZ has a need to run a report that is slightly
different than the standard ones that are already created. Which two types of changes could XYZ
make using the Row Order feature? (Choose two.)
A.add a new calculation
B.sort based on column values
C.display segment values and descriptions
D.change how rounding options are performed
Correct:B C
8.XYZ Enterprise has two diverse business operations in retail stores and services. It has five
legal entities in Canada and five in the United States for both operations. The fiscal year end is the
same for all the legal entities with 12 monthly periods. However, XYZ wants to use a 454
accounting calendar for its retail operations and a calendarmonth
accounting calendar for the
services operations. XYZ also wants to use a single chart of accounts structure. Which five items
must XYZ define to meet the minimum setup steps that are required for the sets of books for all
legal entities? (Choose five.)
A.two sets of books
B.four sets of books
C.three sets of books
D.account combinations
E.one accounting calendar
F.two accounting calendars
G.chart of accounts structure
H.period types or use seeded ones
I.enable seeded CAD and USD currencies
Correct:B F G H I
9.BK Corporation has a legal entity in each of its business operations in the United States, Canada,
Malaysia, Singapore, and Italy. The controller in Italy advises that the corporation must use the
Italian statutory accounts as its natural accounts. The corporation decides to define five sets of
books (one for each country) but wants to use a single, global chart of accounts structure. Choose
a possible design (for the sets of books) that uses a single, global chart of accounts structure, and
also meets the Italian controller’s requirement.
A.The chart of accounts structure contains an extra segment for Italy.
B.The list of values in the Account segment includes a range reserved for Italy.
C.The length of the Account segment for Italy is different from that for the other countries.
D.The chart of accounts structure uses a different Value Set for the Account segment for Italy.
E.The chart of accounts structure for Italy uses Account values prefixed with a special character.
Correct:B
10.What is the effect of summary accounts on the efficiency of the posting process?
A.Use of summary accounts increases the efficiency of the posting process.
B.Use of summary accounts decreases the efficiency of the posting process.
C.There is no effect, because summary accounts do not use the posting process to accumulate values.
D.Use of summary accounts neither increases nor decreases the efficiency of the posting process.
Correct:B

http://www.test4actual.com

http://www.test4actual.com/1z0-211.html

“Oracle Other Certification “, also known as 1z0-208 exam, is a Oracle certification.
Preparing for the 1z0-208 exam? Searching 1z0-208 Test Questions, 1z0-208 Practice Exam, 1z0-208 Dumps?

With the complete collection of questions and answers, Test4actual has assembled to take you through 128 Q&A to your 1z0-208 exam preparation. In the 1z0-208 exam resources, you will cover every field and category in Oracle Other Certification helping to ready you for your successful Oracle Certification.

Free 1z0-208 Demo Download
Test4actual offers free demo for Oracle Other Certification 1z0-208 exam (Oracle comm.billing&revenue mgmt:server developer). You can check out the interface, question quality and usability of our practice exams before you decide to buy it. We are the only one site can offer demo for almost all products.

Exam Details
The Oracle Other Certification exam is the qualifying exam available to candidates pursuing a single-exam option for the Oracle Certified Network Associate Oracle Other Certification certification. The Oracle Other Certification (1z0-208) exam will test materials from the new Interconnection Oracle Network Devices (ICND) course as well as the new Introduction to Oracle Networking Technologies (INTRO) course. The exam will certify that the successful candidate has important knowledge and skills necessary to select, connect, configure, and troubleshoot the various Oracle networking devices. The exam covers topics on Extending Switched Networks with VLANS, Determining IP Routes, Managing IP traffic with Access Lists, Establishing Point-to-Point connections, and Establishing Frame Relay Connections.

http://www.test4actual.com

FREE DEMO:
1.Which of the following opcodes is NOT implemented in the Business Process Tier?
A.PCM_OP_CUST_COMMIT_CUSTOMER
B.PCM_OP_ACT_ACTIVITY
C.PCM_OP_SEARCH
D.PCM_OP_RATE_ACTIVITY
E.PCM_OP_CUST_MODIFY_CUSTOMER
Correct:C
2.Which of the following statements about Opcodetofunction
mapping is TRUE?
A.The config structure is included in the CMs pin.conf file
B.The fm_generic_config.c file is provided with Portal SDK as a template for opcodetofunction
mapping
C.Each opcode macro name is mapped to one or more C functions
D.A and B
E.A, B, and C
Correct:D
3.Which of the following is NOT a valid error location for an error that occurred in the CM?
A.PIN_ERRLOC_CM
B.PIN_ERRLOC_FLIST
C.PIN_ERRLOC_PCM
D.PIN_ERRLOC_POID
E.B and C
Correct:C
4.________________ is a Service Integration Manager that integrates Portal with terminal servers
to support dialup Internet access service
A.Radius Manager
B.Content Manager
C.GSM Manager
D.EAI Manager
E.WAP Manager
Correct:A
5.Which of the following would you NOT find in the DMs configuration file?
A.Path and filename of Translation Manager shared libraries
B.Username and password for accessing external systems
C.Queuing manager parameters
D.Hostname and port number of the CM connecting to this DM
E.Database number for the DM
Correct:D

http://www.test4actual.com/1z0-208.html

6.An array called PIN_FLD_ADDRESS is to be added onto the input Flist, input_flistp. The new
Flist pointer for the array will be called array_flistp. Which of the following provides the CORRECT
syntax for adding the array onto the input Flist?
A.PIN_FLIST_ELEM_ADD (PIN_FLD_ADDRESS, input_flistp, 1, &ebuf);
B.array_flistp = PIN_FLIST_ELEM_ADD (PIN_FLD_ADDRESS, input_flistp, 1, &ebuf);
C.PIN_FLIST_ELEM_ADD (input_flistp, array_flistp, PIN_FLD_ADDRESS, 1, &ebuf);
D.array_flistp = PIN_FLIST_ELEM_ADD (input_flistp, 1, PIN_FLD_ADDRESS, &ebuf);
E.array_flistp = PIN_FLIST_ELEM_ADD (input_flistp, PIN_FLD_ADDRESS, 1, &ebuf);
Correct:E
7.Which of the following statements INCORRECTLY describes the Object Tier of the Portal
architecture?
A.This tier can also be referred to as the Data Manager
B.One object tier can be used with multiple data tiers
C.This tier is used to translate Portal data into the format that can be processed by the Data Tier
D.This tier processes all requests coming from the Business Process Tier
E.This tier can also be referred to as the Translation Manager
Correct:B
8.All Portal opcodes are defined in the ___________________ file. An opcode corresponds to a
___________________. To write the code to implement the new opcode, you can use the
___________________ file as a template.
A.ops.h, function, fm_generic_ops.c
B.pcm_ops.h, function, fm_generic_opcode.c
C.ops.h, function, fm_generic_opcode.c
D.pcm_ops.h, program, fm_generic_ops.c
E.ops.h, program, fm_generic_ops.c
Correct:B
9.Which of the following statements CORRECTLY describes the dm_if_process_op() function?
A.It processes a base opcode from the CM
B.The function contains custom implementation of base opcodes
C.The functionality within this function is specific to the external system
D.A and C
E.A, B, and C
Correct:E
10.Which of the following is an example of an event in Portal?
A.Making a phone call
B.Purchasing a product
C.Rolling over unused free minutes
D.A and B
E.A, B, and C
Correct:E

http://www.test4actual.com

http://www.test4actual.com/1z0-208.html

“Oracle Other Certification “, also known as 1z0-200 exam, is a Oracle certification.
Preparing for the 1z0-200 exam? Searching 1z0-200 Test Questions, 1z0-200 Practice Exam, 1z0-200 Dumps?

With the complete collection of questions and answers, Test4actual has assembled to take you through 107 Q&A to your 1z0-200 exam preparation. In the 1z0-200 exam resources, you will cover every field and category in Oracle Other Certification helping to ready you for your successful Oracle Certification.

Free 1z0-200 Demo Download
Test4actual offers free demo for Oracle Other Certification 1z0-200 exam (Oracle 11i.E-Business Essentials). You can check out the interface, question quality and usability of our practice exams before you decide to buy it. We are the only one site can offer demo for almost all products.

Exam Details
The Oracle Other Certification exam is the qualifying exam available to candidates pursuing a single-exam option for the Oracle Certified Network Associate Oracle Other Certification certification. The Oracle Other Certification (1z0-200) exam will test materials from the new Interconnection Oracle Network Devices (ICND) course as well as the new Introduction to Oracle Networking Technologies (INTRO) course. The exam will certify that the successful candidate has important knowledge and skills necessary to select, connect, configure, and troubleshoot the various Oracle networking devices. The exam covers topics on Extending Switched Networks with VLANS, Determining IP Routes, Managing IP traffic with Access Lists, Establishing Point-to-Point connections, and Establishing Frame Relay Connections.

http://www.test4actual.com

FREE DEMO:
1.Identify three correct statements of a multiorg
setup. (Choose three.)
A.A Government Reporting Entity (GRE)/Legal Entity can point to one and only one Set of Books.
B.Inventory Orgs can be associated directly with a GRE/Legal Entity.
C.The creation of a Master Inventory organization is mandatory.
D.One and only one Operating Unit can be associated with a GRE/Legal Entity.
E.One Set of Books can have one or many GRE’s/Legal Entities associated with it.
Correct:A C E
2.ABC Corp. has set up the Asset Category key flexfield. It has also set up a descriptive flexfield to
store vehicle information associated with the asset category “Vehicle.” Identify two correct
statements. (Choose two.)
A.The setting up of the descriptive flexfield is mandatory.
B.The Asset Category flexfield is owned by the Oracle Assets module.
C.The descriptive flexfield is associated with tables in the Oracle Assets module.
D.Only the Asset Category flexfield is associated with tables in the Oracle Assets module.
Correct:B C
3.ABC Corp. is implementing 11i Oracle Applications. The company has two local administrators
in separate locations. They need to ensure that only a relevant set of users is visible to each of
these local administrators. Which action will meet the requirement?
A.create a separate role for each local administrator
B.specify user administration privileges in Oracle User Management
C.use Data Security to provide relevant access to each local administrator
D.use Function Security to provide relevant access to each local administrator
Correct:B
4.Which are the two options to which a menu can be assigned? (Choose two.)
A.menu
B.functions
C.data group
D.responsibility
E.functional group
Correct:A D
5.Identify two correct options regarding subscription processing. (Choose two.)
A.processes user response
B.processes function activities
C.passes information to Notification Mailer
D.sends event information to a workflow process
E.include the task of executing custom code on the event information
Correct:D E

http://www.test4actual.com/1z0-200.html

6.Identify three correct statements regarding Oracle EBusiness
Suite. (Choose three.)
A.It can run entirely on the Internet.
B.A minimum of two modules needs to be implemented for an organization.
C.It is engineered to work as an integrated system on a single IT infrastructure.
D.It supports multidirectional
flows of business information within an organization.
Correct:A C D
7.Which tier in Oracle EBusiness
Suite is responsible for storing application data?
A.database tier
B.application tier
C.client (desktop) tier
D.both database tier and application tier
Correct:A
8.Identify two tasks of the Application tier in 11i Oracle Applications architecture. (Choose two.)
A.process business logic
B.store business logic in the database
C.retrieve business logic from the database
D.manage communication between desktop/client tier and database tier
Correct:A D
9.Paul wants to log in to 11i Oracle Applications. Identify the first server to which his request
would go.
A.Web server
B.Reports server
C.Administration server
D.Concurrent Processing server
Correct:A
10.ABC Corp. is installing 11i Oracle Applications on two nodes A and B. On Node A, it has
installed the Forms server, Web server, and Administration server. On Node B, it has installed the
Concurrent Processing server. By default, on which node would the Reports server be installed?
A.Node A
B.Node B
C.neither of the nodes
D.both Node A and Node B
Correct:B

http://www.test4actual.com

http://www.test4actual.com/1z0-200.html

“Oracle Other Certification “, also known as 1z0-262 exam, is a Oracle certification.
Preparing for the 1z0-262 exam? Searching 1z0-262 Test Questions, 1z0-262 Practice Exam, 1z0-262 Dumps?

With the complete collection of questions and answers, Test4actual has assembled to take you through 185 Q&A to your 1z0-262 exam preparation. In the 1z0-262 exam resources, you will cover every field and category in Oracle Other Certification helping to ready you for your successful Oracle Certification.

Free 1z0-262 Demo Download
Test4actual offers free demo for Oracle Other Certification 1z0-262 exam (Hyperion Planning 4.1 Administrator ). You can check out the interface, question quality and usability of our practice exams before you decide to buy it. We are the only one site can offer demo for almost all products.

Exam Details
The Oracle Other Certification exam is the qualifying exam available to candidates pursuing a single-exam option for the Oracle Certified Network Associate Oracle Other Certification certification. The Oracle Other Certification (1z0-262) exam will test materials from the new Interconnection Oracle Network Devices (ICND) course as well as the new Introduction to Oracle Networking Technologies (INTRO) course. The exam will certify that the successful candidate has important knowledge and skills necessary to select, connect, configure, and troubleshoot the various Oracle networking devices. The exam covers topics on Extending Switched Networks with VLANS, Determining IP Routes, Managing IP traffic with Access Lists, Establishing Point-to-Point connections, and Establishing Frame Relay Connections.

http://www.test4actual.com

FREE DEMO:
1.To which application elements can you assign access rights? (Choose four.)
A. Account, Entity, Scenario, and Version dimensions
B. Account, Entity, Period, Scenario, and Version dimensions
C. Userdefined
dimension members, if the Apply Security dimension property is selected
D. Data forms
E. Task lists
F. Smart lists
Answer: ACDE
2. You created the MyPlan application with the following plan types:
Revenue
Profit
and Loss
Balance
Sheet
Workforce
How many Essbase Analytics databases are created for MyPlan?
A. 2
B. 4
C. 6
D. 8
Answer: B
3. Planning stores the application definition in the:
A. Shared Services
B. Planning Server
C. Essbase Analytics Database
D. Planning Relational Database
Answer: D
4. When creating Planning applications, what base time period allows you to select Weekly Distribution
options?
A. Yearly
B. Quarterly
C. Monthly
D. Weekly
Answer: C

5. You created the MyPlan Planning application with the following plan types:
Revenue
Profit
and Loss
Balance
Sheet
Workforce
How many relational databases are required for MyPlan?
A. 1
B. 2
C. 3
D. 4
Answer: A
6. You need to run the Shared Services Configuration Utility to create or regenerate the
HspJSHome.properties file whenever you: (Choose three.)
A. Create or delete a Planning application
B. Delete or make changes to a UDL file
C. Install or upgrade a Web application server
D. Backup or restore the Planning relational database
E. Create a new business rule
Answer: ABC
7. For all Hyperion System 9 products, all user provisioning and external authentication is handled through:
A. Shared Services
B. Planning Web client
C. Planning Desktop
D. Analytic Administration Services Console
Answer: A
8. Which data sources are supported by Hyperion Financial Reporting? (Choose all that apply.)
A. Analytic Services 7.1.x or 9.0
B. Planning 4.0.1 or 4.1
C. Financial Management 4.0.1 or 4.1
D. SAP BW 3.1 or 3.5
E. Microsoft SQL Server 2000 Service Pack 3a (Enterprise or Standard Edition)
F. IBM DB2 Release 8.2
Answer: ABCD

http://www.test4actual.com

“Other Oracle “, also known as 1z0-257 exam, is a Oracle certification.
Preparing for the 1z0-257 exam? Searching 1z0-257 Test Questions, 1z0-257 Practice Exam, 1z0-257 Dumps?

With the complete collection of questions and answers, Test4actual has assembled to take you through 210 Q&A to your 1z0-257 exam preparation. In the 1z0-257 exam resources, you will cover every field and category in Other Oracle helping to ready you for your successful Oracle Certification.

Free 1z0-257 Demo Download
Test4actual offers free demo for Other Oracle 1z0-257 exam (Hyperion Financial Management 4.1 Consultant). You can check out the interface, question quality and usability of our practice exams before you decide to buy it. We are the only one site can offer demo for almost all products.

Exam Details
The Other Oracle exam is the qualifying exam available to candidates pursuing a single-exam option for the Oracle Certified Network Associate Other Oracle certification. The Other Oracle (1z0-257) exam will test materials from the new Interconnection Oracle Network Devices (ICND) course as well as the new Introduction to Oracle Networking Technologies (INTRO) course. The exam will certify that the successful candidate has important knowledge and skills necessary to select, connect, configure, and troubleshoot the various Oracle networking devices. The exam covers topics on Extending Switched Networks with VLANS, Determining IP Routes, Managing IP traffic with Access Lists, Establishing Point-to-Point connections, and Establishing Frame Relay Connections.

http://www.test4actual.com

FREE DEMO:
1.Using Hyperion Reports, the Relative Member function can be used with which dimension?
A.Entity
B.Period
C.Scenario
D.Accounts
Answer: B
2. If a user is opening a subcube
for the first time, which grid displays the fastest?
A.Accounts in rows; Years in columns
B.Entities in rows; Scenarios in columns
C.Accounts in rows; Custom1 members in columns
D.Entities in rows; Value dimension members in columns
Answer: C
3. An administrator needs to link several integrations together in the Hub and run them sequentially. How
can this be accomplished?
A.Add the integrations to a group.
B.Use Hyperion Application Link to run the integrations sequentially.
C.Use Common Event services to schedule the DataBroker integrations.
D.Build a master integration in DataBroker which has several sub integrations within it.
Answer: A
4. The AllowAdjFromChildren attribute is checked on a parent entity.
Which two nodes in the Value dimension are valid for Journal entries? (Choose two.)
A.
B.
C. [Parent Adjs]
D. [Contribution Adjs]
E.
Test4actual Information Co., Ltd.All rights reserved.
3 Answer:CD
5. For Number Formatting in the User Preferences, _____.
A.the User Preference takes precedence
B.each application has its own formatting
C.Application Configuration settings take precedence
D.the client’s machine Regional Settings take precedence
Answer: A

http://www.test4actual.com

http://www.test4actual.com/Other-Oracle-Certification.html

“Other Oracle “, also known as 1z0-255 exam, is a Oracle certification.
Preparing for the 1z0-255 exam? Searching 1z0-255 Test Questions, 1z0-255 Practice Exam, 1z0-255 Dumps?

With the complete collection of questions and answers, Test4actual has assembled to take you through 197 Q&A to your 1z0-255 exam preparation. In the 1z0-255 exam resources, you will cover every field and category in Other Oracle helping to ready you for your successful Oracle Certification.

Free 1z0-255 Demo Download
Test4actual offers free demo for Other Oracle 1z0-255 exam (Hyperion Essbase 7.1.2 Cnsultant). You can check out the interface, question quality and usability of our practice exams before you decide to buy it. We are the only one site can offer demo for almost all products.

Exam Details
The Other Oracle exam is the qualifying exam available to candidates pursuing a single-exam option for the Oracle Certified Network Associate Other Oracle certification. The Other Oracle (1z0-255) exam will test materials from the new Interconnection Oracle Network Devices (ICND) course as well as the new Introduction to Oracle Networking Technologies (INTRO) course. The exam will certify that the successful candidate has important knowledge and skills necessary to select, connect, configure, and troubleshoot the various Oracle networking devices. The exam covers topics on Extending Switched Networks with VLANS, Determining IP Routes, Managing IP traffic with Access Lists, Establishing Point-to-Point connections, and Establishing Frame Relay Connections.

http://www.test4actual.com

FREE DEMO:
1. You want to convert your existing nonASM
files to ASM files for the database PROD. Which method or
command would you use to accomplish this task?
A. Data Pump Export and Import
B. conventional export and import
C. the CONVERT command of RMAN
D. the BACKUP AS COPY.. command of RMAN
Answer: D
2.Which are the prerequisites for performing flashback transactions on your database? (Choose all that
apply.)
A. Supplemental log must be enabled.
B. Supplemental log must be enabled for the primary key.
C. Undo retention guarantee for the database must be configured.
D. Execute permission on the DBMS_FLASHBACK package must be granted to the user.
Answer: ABD
3. Which method would you use to undo the changes made by a particular transaction without affecting
the changes made by other transactions?
A. pointintime
recovery
B. execute the ROLLBACK command with transaction number
C. flashback the database to before the transaction was committed
D. determine all the necessary undo SQL statements from FLASHBACK_TRANSACTION_QUERY and
use them for recovery
Answer: D
4. When executing a SQL workload, you choose to generate execution plans only, without collecting
execution statistics. Which two statements describe the implications of this? (Choose two.)
A. It produces less accurate results of the comparison analysis.
B. It automatically calls the SQL Tuning Advisor for recommendations.
C. It shortens the time of execution and reduces the impact on system resources.
D. Only the changes in the execution plan, and not performance regression, are detected.
Answer: AC
5. While deploying a new application module, the software vendor ships the application software along
with appropriate SQL plan baselines for the new SQLs being introduced. Which two statements describe
the consequences? (Choose two.)
A. The plan baselines can be evolved over time to produce better performance.
B.The newly generated plans are directly placed into the SQL plan baseline without being verified.
C. The new SQL statements initially run with the plans that are known to produce good performance
under standard test configuration.
D. The optimizer does not generate new plans for the SQL statements for which the SQL plan baseline
has been imported.
Answer: AC

http://www.test4actual.com

http://www.test4actual.com/1z0-255.html

“Other Oracle “, also known as 1z0-241 exam, is a Oracle certification.
Preparing for the 1z0-241 exam? Searching 1z0-241 Test Questions, 1z0-241 Practice Exam, 1z0-241 Dumps?

With the complete collection of questions and answers, Test4actual has assembled to take you through 158 Q&A to your 1z0-241 exam preparation. In the 1z0-241 exam resources, you will cover every field and category in Other Oracle helping to ready you for your successful Oracle Certification.

Free 1z0-241 Demo Download
Test4actual offers free demo for Other Oracle 1z0-241 exam (PeopleSoft Application Develper I: PeopleTools&PeopleCode). You can check out the interface, question quality and usability of our practice exams before you decide to buy it. We are the only one site can offer demo for almost all products.

Exam Details
The Other Oracle exam is the qualifying exam available to candidates pursuing a single-exam option for the Oracle Certified Network Associate Other Oracle certification. The Other Oracle (1z0-241) exam will test materials from the new Interconnection Oracle Network Devices (ICND) course as well as the new Introduction to Oracle Networking Technologies (INTRO) course. The exam will certify that the successful candidate has important knowledge and skills necessary to select, connect, configure, and troubleshoot the various Oracle networking devices. The exam covers topics on Extending Switched Networks with VLANS, Determining IP Routes, Managing IP traffic with Access Lists, Establishing Point-to-Point connections, and Establishing Frame Relay Connections.

http://www.test4actual.com

FREE DEMO:
1.Select the three statements that are true about search records. (Choose three.)
A.Search records build the search page for the component.
B.Search records are referenced only at level zero in the component.
C.Search records rarely reference views; they are usually SQL tables.
D.Search records populate level zero on all pages that are in the component.
E.Search records provide a highlevel
key to the primary records that are referenced in the component.
Answer: ADE
2. Select the most efficient way to determine the effect of modifying a definition.
A.Examine the SQL in the PeopleTools tables.
B.Use the XREF reports and visually examine the modifications.
C.Use the Find Definition Reference utility in Application Designer.
D.Use the Cross Reference utility in the PeopleTools, Utilities folder.
Answer: C
3. Select the three true statements about PeopleSoft field definitions. (Choose three.)
A.All PeopleSoft field definition names are in uppercase.
B.Date, Time, and DateTime fields all have a fixed length.
C.When you work with Number and Signed Number field types, the sum of integer and decimal positions
cannot
D.Altering an existing field definition’s default label can have consequences at both the record definition
level and the page definition level.E.For a Long Character field, enter a field length of 256 to enable the
database platform to determine the maximum length of the field.
Answer: ABD
4. Examine this PeopleCode snippet
Local Rowset &RS_Level0, &RS_Level1;
Local Row &Row_Level0, &Row_Level1;
Local Record &Rec_EMPLOYEE;
Local Field &Fld_ROLE;
&RS_LEVEL0 = GetLevel0();
&ROW_LEVEL0 = &RS_Level0.GetRow(1);
&RS_LEVEL1 = &ROW_LEVEL0.GetRowSet(SCROLL.DEPT);
&ROW_LEVEL1 = &RS_LEVEL1(1);
&REC_EMPLOYEE = &ROW_LEVEL1.EMPLOYEE;
&FLD_EMPID = &REC_TASKRSRC.EMPID;
&ID = &FLD_EMPID.Value;
Can the code given above be replaced with the following statement?
&ID = GetField().Value
A. No. The record must be specified.
B.No. The row and record must be specified.
C.Yes, if the code is placed on the current row
D.Yes, if the code is placed on the EMPID field.
E.Yes, if the code is placed on the EMPLOYEE record.
Answer: D
5. For the Employee Expenses application, a PeopleCode program could be placed either on the
EMPLOYEE record or on the EMP_EXPENSE component. You decide to place it on the component.
Which is a valid reason for choosing to place the program on the component instead of the record?
A.The program updates multiple database tables.
B.The program validates data across multiple records.
C.Component PeopleCode executes before record PeopleCode, so it is more efficient.
D.The record definition is used on several components, but this program should run only on this
component.
E.The program initializes fields on the search page, and the search record is associated with the
component.
F.The component contains several record definitions and you do not want to duplicate the code in each
record.
G.Component PeopleCode is more reusable because component PeopleCode is available for execution
on other components.
Answer: D

http://www.test4actual.com

http://www.test4actual.com/1z0-241.html

“Other Oracle “, also known as 1z0-047 exam, is a Oracle certification.
Preparing for the 1z0-047 exam? Searching 1z0-047 Test Questions, 1z0-047 Practice Exam, 1z0-047 Dumps?

With the complete collection of questions and answers, Test4actual has assembled to take you through 158 Q&A to your 1z0-047 exam preparation. In the 1z0-047 exam resources, you will cover every field and category in Other Oracle helping to ready you for your successful Oracle Certification.

Free 1z0-047 Demo Download
Test4actual offers free demo for Other Oracle 1z0-047 exam (Oracle Database SQL Expert). You can check out the interface, question quality and usability of our practice exams before you decide to buy it. We are the only one site can offer demo for almost all products.

Exam Details
The Other Oracle exam is the qualifying exam available to candidates pursuing a single-exam option for the Oracle Certified Network Associate Other Oracle certification. The Other Oracle (1z0-047) exam will test materials from the new Interconnection Oracle Network Devices (ICND) course as well as the new Introduction to Oracle Networking Technologies (INTRO) course. The exam will certify that the successful candidate has important knowledge and skills necessary to select, connect, configure, and troubleshoot the various Oracle networking devices. The exam covers topics on Extending Switched Networks with VLANS, Determining IP Routes, Managing IP traffic with Access Lists, Establishing Point-to-Point connections, and Establishing Frame Relay Connections.

http://www.test4actual.com

FREE DEMO:
1.Evaluate the CREATE TABLE statement: CREATE TABLE products (product_id NUMBER(6)
CONSTRAINT prod_id_pk PRIMARY KEY, product_name VARCHAR2(15)); Which statement is true
regarding the PROD_ID_PK constraint?
A.It would be created only if a unique index is manually created first.
B.It would be created and would use an automatically created unique index.
C.It would be created and would use an automatically created nonunique index.
D.It would be created and remains in a disabled state because no index is specified in the command.
Correct:B
2.Which two statements are true? (Choose two.)
A.The USER_SYNONYMS view can provide information about private synonyms.
B.The user SYSTEM owns all the base tables and useraccessible
views of the data dictionary.
C.All the dynamic performance views prefixed with V$ are accessible to all the database users.
D.The USER_OBJECTS view can provide information about the tables and views created by the user
only.
E.DICTIONARY is a view that contains the names of all the data dictionary views that the user can access.
Correct:A E
3.Evaluate the CREATE TABLE statement: CREATE TABLE products (product_id NUMBER(6)
CONSTRAINT prod_id_pk PRIMARY KEY, product_name VARCHAR2(15)); Which statement is true
regarding the PROD_ID_PK constraint?
A.It would be created only if a unique index is manually created first.
B.It would be created and would use an automatically created unique index.
C.It would be created and would use an automatically created nonunique index.
D.It would be created and remains in a disabled state because no index is specified in the command.
Correct:B
4.Which two statements are true? (Choose two.)
A.The USER_SYNONYMS view can provide information about private synonyms.
B.The user SYSTEM owns all the base tables and useraccessible
views of the data dictionary.
C.All the dynamic performance views prefixed with V$ are accessible to all the database users.
D.The USER_OBJECTS view can provide information about the tables and views created by the user
only.
E.DICTIONARY is a view that contains the names of all the data dictionary views that the user can access.
Correct:A E
5.Which two statements are true regarding the execution of the correlated subqueries? (Choose
two.)
A.The nested query executes after the outer query returns the row.
B.The nested query executes first and then the outer query executes.
C.The outer query executes only once for the result returned by the inner query.
D.Each row returned by the outer query is evaluated for the results returned by the inner query.
Correct:A D
6.OE and SCOTT are the users in the database. The ORDERS table is owned by OE. Evaluate the
statements issued by the DBA in the following sequence: CREATE ROLE r1; GRANT SELECT,
INSERT ON oe.orders TO r1; GRANT r1 TO scott; GRANT SELECT ON oe.orders TO scott;
REVOKE SELECT ON oe.orders FROM scott; What would be the outcome after executing the
statements?
A.SCOTT would be able to query the OE.ORDERS table.
B.SCOTT would not be able to query the OE.ORDERS table.
C.The REVOKE statement would remove the SELECT privilege from SCOTT as well as from the role R1.
D.The REVOKE statement would give an error because the SELECT privilege has been granted to the
role R1.
Correct:A

http://www.test4actual.com

http://www.test4actual.com/1z0-047.html

“Other Oracle “, also known as 1z0-050 exam, is a Oracle certification.
Preparing for the 1z0-050 exam? Searching 1z0-050 Test Questions, 1z0-050 Practice Exam, 1z0-050 Dumps?

With the complete collection of questions and answers, Test4actual has assembled to take you through 189 Q&A to your 1z0-050 exam preparation. In the 1z0-050 exam resources, you will cover every field and category in Other Oracle helping to ready you for your successful Oracle Certification.

Free 1z0-050 Demo Download
Test4actual offers free demo for Other Oracle 1z0-050 exam (Oracle Database 11g: New Features for Administrators). You can check out the interface, question quality and usability of our practice exams before you decide to buy it. We are the only one site can offer demo for almost all products.

Exam Details
The Other Oracle exam is the qualifying exam available to candidates pursuing a single-exam option for the Oracle Certified Network Associate Other Oracle certification. The Other Oracle (1z0-050) exam will test materials from the new Interconnection Oracle Network Devices (ICND) course as well as the new Introduction to Oracle Networking Technologies (INTRO) course. The exam will certify that the successful candidate has important knowledge and skills necessary to select, connect, configure, and troubleshoot the various Oracle networking devices. The exam covers topics on Extending Switched Networks with VLANS, Determining IP Routes, Managing IP traffic with Access Lists, Establishing Point-to-Point connections, and Establishing Frame Relay Connections.

http://www.test4actual.com

FREE DEMO:
1.Identify the two direct sources from where SQL plans can be loaded into the SQL plan baselines.
(Choose two.)
A.Cursor cache
B.Stored outline
C.SQL Tuning Set
D.Automatic Workload Repository (AWR) snapshots
Correct:A C
2.Which two statements about workload capture and replay operations are true? (Choose two.)
A.The clients must be created manually on the test machines to perform more realistic testing.
B.Restart the database in RESTRICTED mode before beginning workload replay to enable a clean state
for workload replay.
C.Restart the database in RESTRICTED mode before beginning workload capture to enable a clean state
for capturing the workload.
D.The application state of the capture system must be identical to the application state of the replay
system when the workload replay begins.
Correct:C D
3.Which statement describes the effect of table redefinition on the triggers attached to the table?
A.All triggers on the table remain valid.
B.All triggers on the table are invalidated and are automatically revalidated with the next DML execution
on the table.
C.All triggers on the table are invalidated and must be manually recompiled before the next DML
execution on the table.
D.Only triggers that are affected by the changes to the structure of the table are invalidated and
automatically revalidated with the next DML execution on the table.
Correct:B
4.USER_DATA is a nonencrypted tablespace that contains a set of tables with data. You want to
convert all existing data in the USER_DATA tablespace and the new data into the encrypted format.
Which methods would you use to achieve this? (Choose all that apply.)
A.Use Data Pump to transfer the existing data to a new encrypted tablespace.
B.Use ALTER TABLE..MOVE to transfer the existing data to a new encrypted tablespace.
C.Use CREATE TABLE AS SELECT to transfer the existing data to a new encrypted tablespace.
D.Enable row movement for each table to be encrypted and then use ALTER TABLESPACE to encrypt
the tablespace.
E.Encrypt the USER_DATA tablespace using the ALTER TABLESPACE statement so that all the data in
the tablespace is automatically encrypted.
Correct:A B C
5.Evaluate the following block of code: BEGIN DBMS_NETWORK_ACL_ADMIN.CREATE_ACL ( acl
=> ‘mycompanycompermissions.
xml’, principal => ‘ACCT_MGR’, is_grant => TRUE, privilege =>
‘connect’); DBMS_NETWORK_ACL_ADMIN.ASSIGN_ACL ( acl =>
‘mycompanycompermissions.
xml’, host => ‘*.mycompany.com’); END; What is the outcome of
the above code?
A.It produces an error because a fully qualified host name needs to be specified.
B.It produces an error because the range of ports associated with the hosts has not been specified.
C.It creates an access control list (ACL) with the user ACCT_MGR who gets the CONNECT and
RESOLVE privileges.
D.It creates an access control list (ACL) with the user ACCT_MGR who gets the CONNECT privilege but
not the RESOLVE privilege.
Correct:C

http://www.test4actual.com

http://www.test4actual.com/1z0-050.html

“Other Oracle “, also known as 1z0-048 exam, is a Oracle certification.
Preparing for the 1z0-048 exam? Searching 1z0-048 Test Questions, 1z0-048 Practice Exam, 1z0-048 Dumps?

With the complete collection of questions and answers, Test4actual has assembled to take you through 158 Q&A to your 1z0-048 exam preparation. In the 1z0-048 exam resources, you will cover every field and category in Other Oracle helping to ready you for your successful Oracle Certification.

Free 1z0-048 Demo Download
Test4actual offers free demo for Other Oracle 1z0-048 exam (Oracle Database 10g R2: Administering RAC). You can check out the interface, question quality and usability of our practice exams before you decide to buy it. We are the only one site can offer demo for almost all products.

Exam Details
The Other Oracle exam is the qualifying exam available to candidates pursuing a single-exam option for the Oracle Certified Network Associate Other Oracle certification. The Other Oracle (1z0-048) exam will test materials from the new Interconnection Oracle Network Devices (ICND) course as well as the new Introduction to Oracle Networking Technologies (INTRO) course. The exam will certify that the successful candidate has important knowledge and skills necessary to select, connect, configure, and troubleshoot the various Oracle networking devices. The exam covers topics on Extending Switched Networks with VLANS, Determining IP Routes, Managing IP traffic with Access Lists, Establishing Point-to-Point connections, and Establishing Frame Relay Connections.

http://www.test4actual.com

FREE DEMO:
1.Which optional parameter of the DESCRIPTION clause of a TNS entry can you use to randomize
the access to available listeners?
A.FAILOVER
B.LOAD_BALANCE
C.SOURCE_ROUTE
D.TYPE_OF_SERVICE
Correct:B
2.You are working as a DBA in a RAC environment that is available for testing. The RAC
environment has all the database files stored in the OCFS file system. You plan to install ASM and
move all the database files to ASM to achieve better performance. During the installation, you
selected redundancy level as normal for the disk group being added. What is the reason for
selecting this redundancy level?
A.You want to use hardware mirroring.
B.You do not want to have any mirroring in the disk group.
C.You have two failure groups defined, so you want to use twoway
mirroring.
D.You have three failure groups defined, so you want to use threeway
mirroring.
Correct:C
3.You are running a twoinstance
database with six redo log groups defined and decide to add a
third thread to support a third database instance on the third node of the cluster. Which three
commands would you issue to achieve this using command line administration? (Choose three.)
A.ALTER SYSTEM ENABLE THREAD 3;
B.ALTER DATABASE ENABLE THREAD 3;
C.ALTER SYSTEM ADD LOGFILE THREAD 3 GROUP 8;
D.ALTER SYSTEM ADD LOGFILE THREAD 3 GROUP 7;
E.ALTER DATABASE ADD LOGFILE THREAD 3 GROUP 7;
F.ALTER DATABASE ADD LOGFILE THREAD 3 GROUP 8;
Correct:B E F
4.Which initialization parameter would you use for each RAC instance to make sure that each
listener on each RAC node is aware of the load of all the others?
A.LOCAL_LISTENER
B.REMOTE_LISTENER
C.REMOTE_DEPENDENCIES_MODE
D.PREFER_LEAST_LOADED_NODE_
Correct:B
5.You have a welltuned,
nonRAC
single instance Oracle database with several services, all of
which perform perfectly. You plan to migrate the database to RAC in the next two weeks and all file
systems would be shared using Oracle Cluster File System. After the migration, you want to
perform a test to monitor RACspecific
tuning issues that would not have occurred on a nonRAC
database. Which six areas would you monitor to determine whether there are RACspecific
performance problems after migration? (Choose six.)
A.Interconnect latency
B.Instance recovery time
C.Services with applications that use external tables
D.Services with applications that truncate large tables
E.Services with applications using local context variables
F.Services with queryintensive
applications relying on full table scans
G.Services with insertintensive
applications that use Oracle sequences for index keys
H.Services with applications that have occasional queries, using index access on modestly sized tables
I.Services with insertintensive
applications that generate their own keys without Oracle sequences
Correct:A B D F G I

http://www.test4actual.com

http://www.test4actual.com/1z0-048.html

Product Description
Exam Number/Code: 1Z0-630
Exam Name: Siebel7.7 Analytics Server Architect Professional Core Exam
Questions and Answers:116Q&A
Update Time:2009-6-3
Price:$109.00
“Other Oracle “, also known as 1Z0-630 exam, is a Oracle certification.
Preparing for the 1Z0-630 exam? Searching 1Z0-630 Test Questions, 1Z0-630 Practice Exam, 1Z0-630 Dumps?

With the complete collection of questions and answers, Test4actual has assembled to take you through 116 Q&A to your 1Z0-630 exam preparation. In the 1Z0-630 exam resources, you will cover every field and category in Other Oracle helping to ready you for your successful Oracle Certification.

Free 1Z0-630 Demo Download
Test4actual offers free demo for Other Oracle 1Z0-630 exam (Siebel7.7 Analytics Server Architect Professional Core Exam). You can check out the interface, question quality and usability of our practice exams before you decide to buy it. We are the only one site can offer demo for almost all products.

Exam Details
The Other Oracle exam is the qualifying exam available to candidates pursuing a single-exam option for the Oracle Certified Network Associate Other Oracle certification. The Other Oracle (1Z0-630) exam will test materials from the new Interconnection Oracle Network Devices (ICND) course as well as the new Introduction to Oracle Networking Technologies (INTRO) course. The exam will certify that the successful candidate has important knowledge and skills necessary to select, connect, configure, and troubleshoot the various Oracle networking devices. The exam covers topics on Extending Switched Networks with VLANS, Determining IP Routes, Managing IP traffic with Access Lists, Establishing Point-to-Point connections, and Establishing Frame Relay Connections.

http://www.test4actual.com

FREE DEMO:
1.When doubleclicking
ABC.rpd in the Analytics/Repository directory, the Analytics Server architect gets
the message The repository ‘ABC.rpd’ can only be opened as ReadOnly.
Do you want to open it? What
can you tell from that message? Choose two.
A. Siebel Analytics Server is running
B. Siebel Analytics Web service is running
C. ABC. rpd is a default repository specified in the NQSConfig.ini
D. ABC. rpd is a special repository that can only be opened in online mode
Answer: AC
2. What information does the Administration Tool log when checking out a project? Choose three.
A. Machine name
B. User privileges
C. Repository file size
D. Projects
E. Time
Answer: ADE
3. Which of the following objectlevel
security action settings are done in the Siebel Analytics repository
using the Administration Tool? Choose two.
A. Assign users to a Web catalog group
B. Create a new repository group
C. Create a new user in the repository
D. Create a Web catalog group
E. Define permissions for dashboard
Answer: BC
4. Siebel Answer’s subject areas correspond to which Analytics Administration Tool layer?
A. Presentation layer
B. Business Model and Mapping layer
C.Physical layer
D. Metadata layer
Answer: A
5. How do you invoke Time Series Wizard in the Siebel Analytics Administration Tool?
A. In the Business Model and Mapping layer, select a business model and rightclick> Time Series Wizard
B. In the Physical layer, select a schema folder and rightclick> Time Series Wizard
C. In the Presentation layer, select a catalog folder and rightclick> Time Series Wizard
D. From the File menu, select Time Series Wizard
E. From the Manage menu, select Time Series Wizard
Answer: A

http://www.test4actual.com/1Z0-630.html

6. Which of the following is NOT true of the Siebel Analytics repository?
A. Physical layers can have multiple data sources
B. Objects within a presentation catalog can derive from multiple business models
C. By default, a presentation column uses the same name as its logical column in the Business Model and
Mapping layer
D. Key columns do not get exposed to the UI so it is acceptable to delete them in the Presentation layer
E. Business Model and Mapping layer can have multiple data sources
Answer: B
7. What do the logical joins do? Choose two.
A. They help the Analytics Server choose best physical path between multiple physical tables in each logical table
B. They calculate measurable quantities
C. They are always the same as the physical joins
D. They determine cardinality between logical tables
Answer: AD
8.Which of the following is NOT true of consistency check?
A. It guarantees that the business model is correctly built
B. You can check the whole repository’s consistency or just a business model’s consistency
C. It finds logical columns that are not mapped to physical sources
D. It checks for undefined logical join conditions
Answer: A
9. To set the number of elements at each level of a dimension, which number would you use?
A. The number of columns in a logical table
B. The number of levels in a dimension
C. The number of dimensions in a business model
D. The number of tables in a physical model
E. The number of distinct rows in a physical column
Answer: E
10. Which of the following is NOT necessary when specifying the most economical source?
A. Create a new physical table source manually
B. Create a new logical table source manually
C. Select the physical table
D. Specify the content
Answer: A

http://www.test4actual.com

11. ABC wants to track the difference between the amount billed and the amount collected from its
customers for every quarter. Which of the following methods would NOT be used in this situation?
A. Create a new logical column in the business model
B. Create a new column in the Presentation layer
C. Use existing physical columns as objects in a formula
D. Create a new physical column using the Calculation Wizard
E.Use the Calculation Wizard to create a new column comparing two existing columns
Answer: D
12. ABC wants to measure its revenue based on the country, region, and city by setting up columns to
measure CountryRevenue, RegionRevenue, and CityRevenue. Which measure type is ABC using?
A. Attribute hierarchy
B. Fact hierarchy
C. Rank measure
D. Levelbased
measure
E. Share measure
Answer: D
13. ABC is a multinational corporation. It wants to measure its revenue based on the country, region, and
city by setting up columns to measure CountryRevenue, RegionRevenue, and CityRevenue. Where
would ABC’s server architect set the grand total level?
A. Country
B. Region
C. City
D. None of the above; It needs to create an AllCountry
Grandtotal level and set it there
Answer: D
14. Which of the following are true of the prebuilt Siebel Analytics Repository? Choose three.
A. Prebuilt database objects map to Siebel OLTP or Siebel RMW but not both
B. Prebuilt connection pools reduce the overhead of connecting to a database
C. Many prebuilt star schemas support the prebuilt Siebel Analytics applications
D. Repository variables are prebuilt and therefore cannot be changed
E. Measures can come from multiple stars and case statements determine correct data sources to access
Answer: BCE
15.Pat is a server architect who is new to an integrated Siebel Analytics. Which of the following tools
would Pat use to find out which presentation columns are related to a particular logical column of the
Siebel Analytics repository?
A. Variable Manager
B. Security Manager
C. Query Repository
D. Analytics Dashboard
Answer: C

http://www.test4actual.com/1Z0-630.html

16. Which of the following is true of the query logging level?
A. You can set the logging level for individual users in Siebel Analytics Administration Tool > Manage >
Security > Users
B. You can set the logging level for the groups in Siebel Analytics Administration Tool > Manage >
Security > Users
C. The lower the number of a log level, the more thorough the log is
D. You can set the logging level for the groups and individual users in Siebel Analytics Administration
Tool > Manage > Security > Users
Answer: A
17. ABC Company wants to analyze their sales figure by time period, products, product hierarchies, and
sales rep. In this case, what would be the dimension?
A. Sales figure
B. Time period and products
C. Products, product hierarchies, and sales rep
D. Time period, products, product hierarchies, and sales rep
E. Sales figure, time period, products, and sales rep
Answer: D
18. ABC Company is using Microsoft SQL Server ABC database and no data warehouse. After establishing
connection to the ABC database using ODBC, how would you verify that the connection to be used with the Siebel Analytics was established? Choose two.
A. By running a query against ABC tables using MS SQL Query Analyzer
B. By testing the connection via the Siebel Analytics ODBC Client tool
C. By doubleclicking
the Physical layer’s connection pool in the Siebel Analytics Administration Tool
D. By opening Siebel Answers and checking whether the database shows up in the Subject Area
Answer: AB
19. After modifying and saving the Analytics repository file offline, which steps are necessary to reload the
modified metadata? Choose two.
A. Restart the Siebel Analytics Server
B. Restart the DAC Server
C. Restart the Siebel Server
D. Restart the Siebel Analytics Web service
Answer: AD
20. Click the Exhibit. Which of the following is NOT true of the Exhibit?
A. This repository is open in an online mode
B. Customers, Periods, and Products are the dimensions
C. Dollars, Units Shipped, Units Ordered, Net Weight Shipped, and Cuts are all aggregated
D.The CutsP column has been checked in to the server
Answer: D

http://www.test4actual.com

21. How would you make it possible to check out objects automatically in the Siebel Analytics
Administration Tool?
A. By navigating to Tools > Options > General > Check out objects automatically
B. By navigating to File > Check Out All
C. By navigating to File > MultiUser
Checkout
D. By navigating to Manage > Variables
Answer: A
22. Which of the following is NOT true of Connection Pool?
A. Only one connection pool is allowed for each Physical layer database
B. You can use XML data by specifying Call Interface as XML
C. Maximum connection setting is the maximum number of concurrent connections
D. You can set whether the users can share a login
Answer: A
23. Click the Exhibit. Which of the following is NOT true of the query shown in this log?
A.Physical database accessed for this query was named ABC
B. The query was ordered by Sales District
C. The Dollars information is coming from the SalesFacts presentation table
D. Star repository was accessed for this query
E. D1_customer2, D1_calendar2, and D1_orders2 are the physical tables accessed for this query
Answer: B
24. Which of the following is NOT one of the ways to define physical foreign keys and joins?
A. Create them using Joins Manager > Action > New > Foreign Key
B. In the Business Model and Mapping layer, rightclick
the model folder > Physical Diagram and navigate
to any of the paths
C. In the Physical layer, rightclick
the database > Physical Diagram and navigate to any of the paths that
are not grayed out
D. In the File menu, select Create > Joins
Answer: D
25.What can be used to model a schema in which the dimensions and the fact have a manytomany
relationship?
A. Complex join
B. Aggregate table
C. Helper table
D. Bridge table
Answer: D

http://www.test4actual.com/1Z0-630.html

26. You would like to examine which columns in the Presentation layer map to a specific table in the
business model. Which of the following utilities would you use?
A. Siebel Answers
B. Query Repository from the Analytics Administration Tool
C. Online Help of the Analytics Administration Tool
D. Physical Table Diagram from the Analytics Administration Tool
Answer: B
27. How are the columns in the Period tables map to each other across the layers of a repository? Select
the correct pair to complete the following sentence: The presentation columns map to ____ and the
logical columns map to ___.
A. the logical columns in the Presentation layer; the physical columns in the Physical layer
B. the logical columns of the Business Model and Mapping layer; the physical columns in the Physical
layer or other logical columns of the Business Model and Mapping layer
C. the logical columns of the Physical layer; the physical columns of the Physical layer
D. the logical columns of the Business Model and Mapping layer; the logical columns of the Presentation
layer
Answer: B
28. Which of the following are NOT the steps to create dimensions? Choose two.
A.Drag physical table columns to the appropriate dimension levels
B. Set the levels of a dimension such as Grand Total level or child level
C. Create logical table key or keys
D. Specify the number of elements at each level
E. Check Use for drilldown for every key set for every level
Answer: AE
29. Which of the following are true of the Siebel Analytics repository? Choose two.
A. The Physical layer can have only one data source
B. Objects within a Presentation catalog can derive from multiple business models
C. By default, a presentation column uses the same name as its logical column in the Business Model and
Mapping layer
D. Delete key columns in the Presentation layer even if you need the third part tools to access the
Presentation layer using the ODBC driver
E. The Business Model and Mapping layer can have multiple data sources
Answer: CE
30. Which of the following can be done using the Expression Builder utility? Choose three.
A. Synchronize aliases
B. Copy a business model with a Presentation catalog
C. Update the Physical layer
D. Create aggregations
E. Create physical complex joins
F. Create a calculation measure using existing logical or physical columns as objects in a formula
Answer: DEF

http://www.test4actual.com

http://www.test4actual.com/1Z0-630.html

Product Description
Exam Number/Code: 1z1-046
Exam Name: Orcale database 10g:Managing Orcale on Linux for DBAs
Questions and Answers:138Q&A
Update Time:2009-6-3
Price:$109.00
“10g DBA Other Oracle “, also known as 1z1-046 exam, is a Oracle certification.
Preparing for the 1z1-046 exam? Searching 1z1-046 Test Questions, 1z1-046 Practice Exam, 1z1-046 Dumps?

With the complete collection of questions and answers, Test4actual has assembled to take you through 138 Q&A to your 1z1-046 exam preparation. In the 1z1-046 exam resources, you will cover every field and category in 10g DBA Other Oracle helping to ready you for your successful Oracle Certification.

Free 1z1-046 Demo Download
Test4actual offers free demo for 10g DBA Other Oracle 1z1-046 exam (Orcale database 10g:Managing Orcale on Linux for DBAs). You can check out the interface, question quality and usability of our practice exams before you decide to buy it. We are the only one site can offer demo for almost all products.

Exam Details
The 10g DBA Other Oracle exam is the qualifying exam available to candidates pursuing a single-exam option for the Oracle Certified Network Associate 10g DBA Other Oracle certification. The 10g DBA Other Oracle (1z1-046) exam will test materials from the new Interconnection Oracle Network Devices (ICND) course as well as the new Introduction to Oracle Networking Technologies (INTRO) course. The exam will certify that the successful candidate has important knowledge and skills necessary to select, connect, configure, and troubleshoot the various Oracle networking devices. The exam covers topics on Extending Switched Networks with VLANS, Determining IP Routes, Managing IP traffic with Access Lists, Establishing Point-to-Point connections, and Establishing Frame Relay Connections.

http://www.test4actual.com

FREE DEMO:
1.In an online transaction processing (OLTP) database instance that involves a high volume of data
manipulation language (DML) operations, you decide to increase the value of the LOG_BUFFER parameter.
What could be the reason for this change?
A.The buffer busy wait event has been detected.
B.The no free buffers event has been detected.
C.The log buffer space wait event has been detected.
D.The log file completion wait event has been detected.
E.The value for the free buffer inspected statistics is growing.
ANSWER: C
2. ho.sh is an executable shell script. You executed the following command that leads to an error:
$ strace o
/tmp/ho.out ./ho.sh
strace: exec: Permission denied
What could you do to execute the command successfully in the next attempt?
A.Provide the shell reference with the command.
B.Remove the shell reference present inside the shell script.
C.Execute the command as the root operating system user.
D.The extension for the output file should be changed to .log.
ANSWER: A
3. You need to ensure that whenever you create a new file, it should have the following set of permissions:
u=rwx,g=rx,o=rx.
Which statement can you add to the .bashrc script to set the desired file permissions?
A.umask 455
B.umask 012
C.umask 0755
D.chmod u=rwx,g=rx,o=rx
ANSWER: C
4. Which three statements are true about Oracle Clustered File System (OCFS)? (Choose three.)
A.There is no limit on the number of files on OCFS.
B.You can use OCFS for database files as well as general files.
C.You can create an OCFS using Logical Volume Manager (LVM).
D.You must modify the Linux kernel parameters before mounting OCFS.
E.Standard file system commands, such as mkdir, rmdir, and mv, are available on OCFS.
ANSWER:ABE
5. The OS user BOB is a member the osoper OS group in the database server. You want BOB :
Which of the option would fulfill the requirement?
A.Assign the sysdba privilege to BOB.
B.Assign the osdba OS group to BOB.
C.Set the REMOTE_LOGIN_PASSWORDFILE initialization parameter to SHARED.
D.Set the REMOTE_LOGIN_PASSWORDFILE initialization parameter to EXCLUSIVE.
ANSWER: B

http://www.test4actual.com/1z1-046.html

6. You executed the ipcs m
command to list all the shared memory segments in your Oracle server.
View the Exhibit exhibit1 that shows the output of this command.
Later, you executed the same command to check the shared memory segments.
View the Exhibit exhibit2 that shows the output of this command.
Why is the large shared memory segment not listed in the second Exhibit?
A.The Oracle database instance is shut down.
B.The swap space has been increased in the system.
C.The Oracle database instance is configured in shared server mode.
D.The large pool size set for the Oracle database instance is reset to zero.
ANSWER: A
7. You attempt to modify the ksms.s library and relink the Oracle database executable to use the address
0X15000000 for the System Global Area (SGA). You receive an error.
Which set of commands would you use to restore the original settings?
A.echo 0X1000000 > ksms.s
make f
ins_rdbms.mk ksms.s
B.echo 0X15000000 > ksms.s
make f
ins_rdbms.mk ioracle
C.make f
ins_rdbms.mk ksms.s
make f
ins_rdbms.mk ioracle
D.genksms > ksms.s
make f
ins_rdbms.mk ksms.o
make f
ins_rdbms.mk ioracle
E.genksms s
0X10000000 > ksms.o
ANSWER: D
8.You want to install Oracle Database 10g on a Linux machine. You want to ensure that no tainted
modules are loaded on the kernel. Which commands will you execute to achieve this?
A.uname r
B.uname v
C.cat /proc/version
D.cat /proc/sys/kernel/tainted
ANSWER: D
9. Examine the content of the /proc/sys/kernel/tainted file on your Linux machine:
[root@edtdr6p1 root]# cat /proc/sys/kernel/tainted
1
What will happen when you install Oracle Database 10g on this machine?
A.Installation will fail because of the tainted kernel.
B.Installation will be successful, but Oracle will not provide support for the database product.
C.Installation will be successful. Oracle will provide support for the database product but not for the
operating system (OS).
D.Installation will be successful and Oracle will provide support for the database product as well as the
OS.
E.Successful installation and Oracle support for database product as well as Linux OS will depend on the
module tainting the kernel.
ANSWER: E
10. A nonGeneral
Public License (GPL) driver was loaded on a Linux machine. To verify that the module
has tainted the kernel, you executed the cat /proc/sys/kernel/tainted command and received the following
output:
[root@edtdr6p1 root]# cat /proc/sys/kernel/tainted
1
What do you infer from the output? (Choose all that apply.)
A.A proprietary module has been loaded.
B.A module is marked unsupported by the vendor.
C.All the loaded modules have General Public License (GPL).
D.A module was forceloaded
by using the insmod f command.
ANSWER: AD

http://www.test4actual.com

http://www.test4actual.com/1z1-046.html

“Other Oracle “, also known as 1z0-051 exam, is a Oracle certification.
Preparing for the 1z0-051 exam? Searching 1z0-051 Test Questions, 1z0-051 Practice Exam, 1z0-051 Dumps?

With the complete collection of questions and answers, Test4actual has assembled to take you through 126 Q&A to your 1z0-051 exam preparation. In the 1z0-051 exam resources, you will cover every field and category in Other Oracle helping to ready you for your successful Oracle Certification.

Free 1z0-051 Demo Download
Test4actual offers free demo for Other Oracle 1z0-051 exam (Oracle Database: SQL Fundamentals I). You can check out the interface, question quality and usability of our practice exams before you decide to buy it. We are the only one site can offer demo for almost all products.

Exam Details
The Other Oracle exam is the qualifying exam available to candidates pursuing a single-exam option for the Oracle Certified Network Associate Other Oracle certification. The Other Oracle (1z0-051) exam will test materials from the new Interconnection Oracle Network Devices (ICND) course as well as the new Introduction to Oracle Networking Technologies (INTRO) course. The exam will certify that the successful candidate has important knowledge and skills necessary to select, connect, configure, and troubleshoot the various Oracle networking devices. The exam covers topics on Extending Switched Networks with VLANS, Determining IP Routes, Managing IP traffic with Access Lists, Establishing Point-to-Point connections, and Establishing Frame Relay Connections.

http://www.test4actual.com

FREE DEMO:
1. You need to extract details of those products in the SALES table where the PROD_ID column contains
the string ‘_D123′.
Which WHERE clause could be used in the SELECT statement to get the required output?
A.WHERE prod_id LIKE ‘%_D123%’ ESCAPE ‘_’
B.WHERE prod_id LIKE ‘%\_D123%’ ESCAPE ‘\’
C.WHERE prod_id LIKE ‘%_D123%’ ESCAPE ‘%_’
D.WHERE prod_id LIKE ‘%\_D123%’ ESCAPE ‘\_’
Answer: B
2. Which two statements are true regarding single row functions? (Choose two.)
A.They accept only a single argument.
B.They can be nested only to two levels.
C.Arguments can only be column values or constants.
D.They always return a single result row for every row of a queried table.
E.They can return a data type value different from the one that is referenced.
Answer: DE
3. Which SQL statements would display the value 1890.55 as $1,890.55? (Choose three.)
A.SELECT TO_CHAR(1890.55,’$0G000D00′)
B.SELECT TO_CHAR(1890.55,’$9,999V99′)
C.SELECT TO_CHAR(1890.55,’$99,999D99′)
D.SELECT TO_CHAR(1890.55,’$99G999D00′)
E.SELECT TO_CHAR(1890.55,’$99G999D99′)
Answer: ADE
4. Examine the structure of the SHIPMENTS table:
You want to generate a report that displays the PO_ID and the penalty amount to be paid if the
SHIPMENT_DATE is later than one month from the PO_DATE. The penalty is $20 per day.
Evaluate the following two queries:
Which statement is true regarding the above commands?
A.Both execute successfully and give correct results.
B.Only the first query executes successfully but gives a wrong result.
C.Only the first query executes successfully and gives the correct result.
D.Only the second query executes successfully but gives a wrong result.
E.Only the second query executes successfully and gives the correct result.
Answer: C
5. Which two statements are true regarding the USING and ON clauses in table joins? (Choose two.)
A.Both USING and ON clauses can be used for equijoins and nonequijoins.
B.A maximum of one pair of columns can be joined between two tables using the ON clause.
C.The ON clause can be used to join tables on columns that have different names but compatible data
types.
D.The WHERE clause can be used to apply additional conditions in SELECT statements containing the
ON or the
USING clause.
Answer: CD

http://www.test4actual.com

http://www.test4actual.com/1z0-051.html

“Other Oracle “, also known as 1z0-311 exam, is a Oracle certification.
Preparing for the 1z0-311 exam? Searching 1z0-311 Test Questions, 1z0-311 Practice Exam, 1z0-311 Dumps?

With the complete collection of questions and answers, Test4actual has assembled to take you through 152 Q&A to your 1z0-311 exam preparation. In the 1z0-311 exam resources, you will cover every field and category in Other Oracle helping to ready you for your successful Oracle Certification.

Free 1z0-311 Demo Download
Test4actual offers free demo for Other Oracle 1z0-311 exam (oracle application server 10g:administration ). You can check out the interface, question quality and usability of our practice exams before you decide to buy it. We are the only one site can offer demo for almost all products.

Exam Details
The Other Oracle exam is the qualifying exam available to candidates pursuing a single-exam option for the Oracle Certified Network Associate Other Oracle certification. The Other Oracle (1z0-311) exam will test materials from the new Interconnection Oracle Network Devices (ICND) course as well as the new Introduction to Oracle Networking Technologies (INTRO) course. The exam will certify that the successful candidate has important knowledge and skills necessary to select, connect, configure, and troubleshoot the various Oracle networking devices. The exam covers topics on Extending Switched Networks with VLANS, Determining IP Routes, Managing IP traffic with Access Lists, Establishing Point-to-Point connections, and Establishing Frame Relay Connections.

http://www.test4actual.com

FREE DEMO:
1.A portal user named USER1 registered a new database provider with the OracleAS Portal
instance. What are the actions that are implicitly performed as a result of the registration?
(Choose all that apply.)
A.A new page is created in the Portlet Repository page group.
B.The provider registration information is saved in the dads.conf file.
C.The provider registration information is saved in the portlet repository.
D.A new database schema is created with the same name as the provider.
Correct:A C
2.What makes it possible to access the portal from the OracleAS SSO Administer Partner
Applications page?
A.The administrator registers the portal manually to OracleAS SSO using the ossoreg.jar tool.
B.The registration of the first external application with OracleAS SSO adds OracleAS Portal as a partner
application.
C.The ssocfg.sh script needs to be executed first to access the portal from the OracleAS SSO Administer
Partner Applications page.
D.During OracleAS middletier
installation, the installer automatically adds the OracleAS Portal as a
partner application for OracleAS SSO.
Correct:D
3.Today, most Java 2, Enterprise Edition (J2EE) applications use a database to have a persistent
storage for data. Which two statements regarding the data source are true? (Choose two.)
A.J2EE applications cannot use more than one data source.
B.J2EE applications use the data source to ensure portability across application servers.
C.J2EE applications retrieve connections to the database through DataSource objects.
D.J2EE applications use the data source to store the Java Naming and Directory Interface (JNDI) tree.
Correct:B C
4.Which statements describe the functionality of OracleAS Single SignOn?
(Choose all that apply.)
A.It can be used in either a secure sockets layer (SSL) mode or a nonSSL mode.
B.It uses Single SignOn
SDK to enable the single signon
functionality.
C.It uses Oracle Application Server Containers for J2EE (OC4J) to store user information.
D.It uses the Single SignOn
username and password from the Oracle Internet Directory (OID) to
authenticate users.
Correct:A D
5.You want to install Oracle Application Server 10g middle tier that enables you to generate
Webbased
reports and authenticate users accessing the middletier
components. Which
components must you have installed before you start installing OracleAS Portal and Wireless?
(Choose all that apply.)
A.Identity Management
B.J2EE and Web Cache
C.OracleAS Developer Kits
D.OracleAS Metadata Repository
Correct:A D

http://www.test4actual.com/1z0-311.html

6.In Oracle Internet Directory (OID), which Directory Information Tree (DIT) attribute would you use
to find out the object classes that are available in Identity Management Realm?
A.orclUserObjectClass
B.orclCommonUserSearchBase
C.orclCommonGroupSearchBase
D.orclCommonUserNickNameAttribute
Correct:A
7.While setting up the Oracle HTTP Server (OHS) for your Oracle Application Server 10g
installation, you want to enable the server to set a host name that can be used to create
redirection URLs, using the ServerName directive. Within which two scopes can you specify the
directive in the httpd.conf file? (Choose two.)
A.in a block container
B.in a location container
C.in a directory container
D.in a virtual host container
E.in the serverlevel
configuration
Correct:D E
8.You have not set the Subscriber Search Base node in Directory Information Tree (DIT) in Identity
Management Realm by using the orclSubscriberSearchBase attribute. You use Discovery
mechanism to find out user information in the DIT. Which statement is true in this scenario?
A.This attribute cannot have null values.
B.This attribute value points to the parent of Default Subscriber.
C.This attribute would have the same value as User Search Base.
D.This attribute would have the same value as Default Subscriber.
E.This attribute would have the same value as Subscriber Nickname.
Correct:B
9.You have a text file written in LDAP Data Interchange Format (LDIF) that contains the entries to
be added to the Oracle Internet Directory (OID). Using this text file as a source file, you want to
add the entries concurrently using multiple threads. Which OID commandline
tool would you use?
A.ldapadd
B.ldapbind
C.ldapmoddn
D.ldapaddmt
Correct:D
10.You have Oracle Application Server 10g instance running. For the parent Oracle HTTP Server
process you want five child processes to be always running. In addition to this, you want to
restrict the number of requests that are handled simultaneously by the child processes to 20.
Which options would you use to achieve this objective? (Choose all that apply.)
A.MaxClients 20
B.StartServers 5
C.MaxSpareServers 5
D.MinSpareServers 10
E.MaxRequestsPerChild 20
Correct:A B

http://www.test4actual.com

http://www.test4actual.com/1z0-311.html