Here are some practice about EMC E20-097 exam which are released by Test4actual,it provides a lot of IT certification exams,I hope they will help you pass your test.
Any doubts about the products quality left? Try the Test4actual E20-097 exam free demo before buy!

1.What is an EMC NetWorker pool?
A.Collection of labeled volumes
B.Group of backup clients
C.Multiple save sets
D.Tape devices from multiple autochangers
Answer: B

2.What is a benefit of using EMC NetWorker modules?
A.Allows backup of a database in use
B.Improves tape utilization ratio
C.Organizes data on the backup media for fast recovery
D.Performs cold database backups
Answer: A

3.Which type of EMC NetWorker backup automatically results in the backup of the client file index?
A.Client-initiated and server-initiated
B.Client-initiated only
C.Raw backups
D.Server-initiated only
Answer: D

4.Which EMC NetWorker option enables concurrent backup and recovery on the same device?
A.Advanced file type device
B.Automatic cloning
C.Save set streaming
D.SILO jukeboxes
Answer: C

5.What is a benefit of using the EMC NetWorker SnapImage module?
A.Allows block-level backups of file systems
B.Allows the backup of raw devices
C.Integrates with array remote replication technology
D.Integrates with array snapshot technology
Answer: A

http://www.test4actual.com/E20-097.html

6.For operational backup, what helps to determine the retention period?
A.Backup type used
B.Percentage of restore requests over time
C.Recovery time objective
D.Tape media type used
Answer: B

7.What is a function of EMC NetWorker?
A.Enables failover to passive nodes
B.Enables failover to remote servers
C.Manages capacity of front end storage devices
D.Protects critical business data
Answer: C

8.How do EMC HomeBase recoveries differ from other bare metal recovery strategies?
A.Independent of a specific backup manager
B.Requires backup application data onsite before recovery can begin
C.Target hardware must be identical to the source server
D.Uses a different recovery tool for each platform type
Answer: A

9.When backing up a file server, the data change rate is very high. Which backup level would you recommend for daily backups?
A.Consolidated
B.Differential
C.Full
D.Incremental
Answer: C

10.What does an EMC HomeBase extended profile contain?
A.All attributes of the operating system required to recover or migrate the environment
B.Attributes and configuration from protected servers running on a platform different from the HomeBase server
C.Attributes required to re-establish the application environment on the recovery server
D.Replication attributes used when multiple protected sites are in place
Answer: C

http://www.test4actual.com

http://www.test4actual.com/E20-097.html

http://www.hp-exam.com

Here are some practice about Adobe 9A0-096 exam which are released by Test4actual,it provides a lot of IT certification exams,I hope they will help you pass your test.
Any doubts about the products quality left? Try the Test4actual Adobe 9A0-096 exam free demo before buy!

1. In the Paint panel, what does the Flow attribute affect?
A. the maximum amount of paint applied
B. how quickly paint is applied or removed
C. the ratio between the short and long axes of a brush
D. how pixels in the underlying image are blended with the pixels painted
Answer: B

2. You are interpolating between two keyframed mask shape paths by using the Smart Mask Interpolation panel.
Which option in the Smart Mask Interpolation panel lets you control how Smart Mask Interpolation matches vertices one keyframe to another keyframe?
A. Quality
B. Matching Method
C. First Vertices Match
D. Bending Resistance
E. Add Mask Shape Vertices
Answer:A

3. How can you find out the number vertices of a mask?
A. select the mask in the timeline and look in the Info panel
B. select the mask in the timeline, open the Mask properties and look under Mask Path
C. select the mask in the Composition panel, right-click on it, select Mask and select Vertices at the bottom of the menu
D. select the mask in the Composition panel, go to Layer > Mask > Mask Shape to bring up the Mask Shape dialog box containing the vertices information
Answer:A

4. You have applied Motion Blur to an animating mask shape.
Which option lets you control the amount of blurring to the mask as it animates?
A. Mask Feather
B. Mask Expansion
C. Layer > Masks > Motion Blur
D. Composition Settings > Advanced > Shutter Angle
E. Composition Settings > Advanced > Shutter Phase
Answer: D

5. What should you do to apply permanent motion blur to a mask?
A. select the mask, then choose Layer > Mask > Motion Blur > On
B. select the mask, then choose Layer > Mask > Motion Blur > Same As Layer
C. select the mask, then click the Motion Blur switch for the layer in the timeline
D. select the mask, then click the Composition Motion Blur switch in the timeline
Answer:A

http://www.test4actual.com/9a0-096.html

6. When pasting a mask path from an After Effects layer into the Position property for an object in the Timeline panel,the size of the resulting motion path needs to be a different size than the original mask path.
Which action lets you resize the motion path?
A. apply the Free Transform Points command to the position keyframes
B. convert the roving keyframes created when pasting the path to the Position property into Bezier keyframes
C. resize the mask path in a solid layer the size of the composition before pasting the path into the Position property
D. set the Display > Motion Path section of After Effects Preferences to show all keyframes before pasting the path into the Position property
Answer: C

7. When working in an After Effects Composition panel, you need to lock the current composition viewer, split the current frame, and create a new composition viewer in the frame.
Which action performs this function in the Composition panel?
A. choose Maximize Frame from the Composition panel menu
B. press Ctrl+Alt+Shift+N (Windows) or Command+Option+Shift+N (Mac OS) on the keyboard
C. lock the Composition panel and choose Maximize Frame from the Composition panel menu
D. Ctrl (Windows) or Command (Mac OS) drag the gripper area in the upper-left corner of the Composition panel into the center of the work area
E. Ctrl (Windows) or Command (Mac OS) drag the group gripper in the upper-right corner of the Composition panel into the center of the work area
Answer: B

8. When previewing an After Effects composition that contains several nested compositions, a Timeline panel different from the current Composition panel plays.
What is causing this scenario?
A. The Timeline panel is locked.
B. The Composition panel is locked.
C. The Maximize Frame command has been enabled for the Timeline panel.
D. The Maximize Frame command has been enabled for the Composition panel.
E. You have selected a nested composition in the Timeline panel with the mouse before previewing.
Answer: B

9. Which tool lets you change the point from which transformations happen to a layer in the Composition panel,without changing the layer’s appearance or position?
A. Selection tool
B. Puppet Pin tool
C. Pan Behind tool
D. Convert Vertex tool
E. Unified Camera tool
Answer: C

10. Which action lets you motion sketch an animation with the Puppet Pin tool?
A. drag a Deform pin with the Puppet Pin tool
B. place Deform pins at different points in time in the Composition panel
C. place Puppet Overlap pins at different points in time in the Composition panel
D. drag a Deform pin with the Control key (Windows) or Command key (Mac OS)
E. drag a Puppet Overlap pin with the Control key (Windows) or Command key (Mac OS)
Answer: D

http://www.test4actual.com

http://www.test4actual.com/9a0-096.html

http://blog.test4actual.com

Hello,everyone,Test4actual is the first to update the Adobe 9A0-088 exam,here are some practice about Adobe 9A0-088 exam,we hope we can help you pass your test.

1. While working on a document to be printed on an offset press you decide to print a composite proof to examine the results of color trapping manually done in the document.To accomplish this, you should choose which Overprint setting on the Advanced pane of the Print dialog?
A. Discard
B. Simulate
C. Preserve
D. Print as Bitmap
Answer: B

2. Which option must be turned on before you can turn off visibility of individual color plates in the Separation Preview panel?
A. Proof Colors
B. Pixel Preview
C. Isolation Mode
D. Overprint Preview
Answer: D

3. You create artwork that is to be restricted to two Pantone spot colors. When printed, you discover that there are objects using Cyan and Magenta in your document.How can you find these objects?
A. choose View > Edit Views
B. choose Edit > Find and Replace
C. deselect all objects, then choose Window > Appearance
D. choose Select > All, then choose Edit > Edit Colors > Adjust Color
E. select the Overprint Preview checkbox in the Separations Preview panel, then turn off visibility for the Pantone colors
Answer: E

4. You are preparing a PDF file for your printer. You want to include trim marks and a bleed value of 0.25 inches.
What should you do to prevent printer marks from being visible in the bleed area?
A. set the four bleed settings to a value above 0.25 inch
B. enter a value of 0.25 inch for the four bleed settings and the Offset setting
C. set the four bleed settings to 0.25 inch, then deselect the Trim Marks checkbox
D. select the Use Document Bleed Settings checkbox and deselect the Color Bars checkbox
Answer: B

5. To make it easier to print documents to the same device in the future you have decided to create a reusable print preset.
What should you do?
A. choose File > Print, set all options, then select Custom from the Print Preset popup menu
B. choose File > Print, set all options, click the disk icon in the upper right corner of the dialog box
C. choose File > Print, set all options, then Option-click (Mac OS) or Alt-click (Windows) the Print button
D. choose File > Print, set all options, click the Page Setup button in the lower left corner of the dialog box
Answer: B

http://www.test4actual.com/9A0-088.html

6. You are saving a PDF file and you want to protect it with a password.
In the Save Adobe PDF dialog box, what determines whether or not you can use High (128-bit RC4) encryption?
A. Color Conversion pop-up menu
B. Acrobat Compatibility pop-up menu
C. Compress Text and Line Art checkbox
D. Optimize for Fast Web View checkbox
Answer: B

7. You are saving a document as a PDF file. Your printer has instructed you to leave the transparency effects unflattened.
Which PDF standard should you choose?
A. PDF/X-1a:2001
B. PDF/X-3:2002
C. PDF/X-3:2003
D. PDF/X-4:2008
Answer: D

8. You want to create a new document in which you will lay out three same-sized 1/3-page newspaper ads.
After choosing File > New, which settings should you choose from the New Document dialog box?
A. choose Print from the New Document Profile list; enter 3 in the Number of Artboards field; specify the size,spacing, and bleed values in the fields provided and click OK
B. choose Basic RGB from the New Document Profile list; enter 3 in the Number of Artboards field; specify the size,spacing, and bleed values in the fields provided and click OK
C. choose Basic CMYK from the New Document Profile list; enter 3 in the Number of Artboards field; specify the size,spacing, and bleed values in the fields provided and click the Templates button
D. choose Web from the New Document Profile pop-up menu; enter 3 in the Number of Artboards field; specify the size, spacing in the fields provided, then click the Advanced button, then the Templates button
Answer: A

9. You want to save the current document setup as a document profile that you can use to create future documents.
What should you do?
A. choose File > New. You enter a name for the profile in the Name field and then click OK
B. make sure Document is selected in the Document Info panel flyout menu, and then choose Save from the panel menu; in the Save Selection Info As dialog box, enter a name for the profile in the Save As field and click Save
C. choose File > Save As; in the Save As dialog box, enter a name for the profile in the Save As field; choose Adobe Illustrator (ai) from the Format menu; browse to the New Document Profiles folder on your system and click Save
D. choose File > Save As Template; in the Save As dialog box, you enter a name for the profile in the Save As field;choose Illustrator Template (ait) from the Format menu; browse to the Templates folder on your system and click Save
Answer: C

10. You must add an additional Artboard that is 11″ x 17″ in your document. To accomplish this, you select the Artboard tool from the Tools panel.
What should you do next?
A. press Command-N (Mac OS) or Ctrl-N (Windows), choose Tabloid from the Size pop-up menu, and click OK
B. double-click in an empty part of the artboard, then choose Tabloid from the Presets pop-up menu in the Control panel
C. drag a rectangle in the document window, and then select Tabloid from the Presets pop-up menu in the Control panel
D. click the New Artboard button in the Control panel, and then select Tabloid from the Presets pop-up menu in the Control panel
Answer: C

http://www.test4actual.com

http://www.test4actual.com/9A0-088.html

http://www.hp-exam.com

I have passed the Adobe 9A0-086 exam recently,if you are worried about it,maybe I can share some experience with you.A colleague of mine, who have got the Adobe certification, recommend Test4actual to me, saying that without the help of test4actual, he couldn’t have passed the exam.
Any doubts about the products quality left? Try the Test4actual Adobe 9A0-086 exam free demo before buy!

1. You want to create text along the edge of an oval frame that you’ve drawn with the Ellipse tool.
What should you do?
A. right+click (Ctrl+click with a one button mouse) the ellipse with the Type on a Path tool and choose Content >Text from the contextual menu
B. click the edge of the ellipse with the Type on a Path tool
C. double-click the edge of the ellipse with the Direct Selection tool
D. Shift+click the edge of the ellipse with the Type tool
Answer: B

2. You have created a new object style. In the Stroke pane of the New Object Style dialog box, you choose a 2-point red stroke. In the Paragraph Styles pane, you choose a paragraph style called “Heading”.
What happens when you select a graphic frame with a JPEG image in it and assign this object style?
A. The frame is converted to an empty text frame with a 2-point red stroke and the graphic is deleted.
B. The frame is converted to a text frame with a 2-point red stroke and the graphic is converted to an inline object.
C. The frame is assigned a 2-point red stroke and the graphic remains.
D. The frame remains the same and this object style is not applied.
Answer: C

3. You have a long story threaded across multiple columns on multiple pages. You want to ensure that a column of text does not begin with a single last line of a paragraph (widow), or end with a single first line of a paragraph(orphan).
Which feature lets you control this?
A. Paragraph Rules from the Paragraph panel menu
B. Justification from the Paragraph panel menu
C. Advanced Type pane of the Preferences dialog box
D. Keep Options from the Control panel menu
Answer: D

4. You have selected a table and you want to use Quick Apply to choose a table style.
What should you do so that Quick Apply only displays table styles?
A. press Ctrl+Enter (Windows) or Command+Enter (Mac OS) and then type “t:”
B. press Ctrl+Enter (Windows) or Command+Enter (Mac OS) and then Alt-t (Windows) or Option-t (Mac OS)
C. choose Window > Type & Tables > Table Styles, and then click on the Quick Apply button in the Table Styles panel
D. open the Quick Apply window and Option-click (Mac OS) or Alt-click (Windows) on any table style in the list
Answer:A

5. You want to apply an opaque gradient fill at an angle, from the lower-left corner to the upper-right corner of a square frame.
Which feature do you use to accomplish this?
A. New Gradient Swatch dialog box
B. Gradient panel
C. Effects panel
D. Gradient Feather tool
Answer: B

http://www.test4actual.com/9A0-086.html

6. Using the Preflight panel, you want to locate any imported color bitmapped image with an effective resolution under 250 ppi.
What should you do?
A. create a new Preflight profile with a Color Image Minimum Resolution setting of 250 ppi
B. create a new Preflight profile with a Color Image Maximum Resolution setting of 250 ppi
C. edit the Basic profile using a Color Image Minimum Resolution setting of 250 ppi
D. edit the Basic profile using a Color Image Maximum Resolution setting of 250 ppi
Answer:A

7. You select a color in the Swatches panel and open the Swatches panel menu. New Mixed Ink Swatch is disabled(grayed out).
Why do this happen?
A. You must first select the Gradient Swatch tool in the Tool panel.
B. You must select two swatches in the Swatches panel to create a mixed ink swatch.
C. You must have at least one spot color swatch to create a mixed ink swatch.
D. You need to first select an object on the page.
Answer: C

8. You want to place crop marks 4 mm from the trim edge when printing.
What should you do?
A. select the All Printer’s Marks checkbox in the Marks and Bleed pane of the Print Dialog Box, and set the Offset field to 4 mm
B. deselect the Use Document Bleed Settings checkbox in the Marks and Bleed tab of the Print Dialog Box, and manually enter 4 mm for all four sides
C. choose File > Document Setup, click the More Options button, and enter 4 mm as the Slug value
D. choose File > Print Booklet and enter 4 mm in the Creep field
Answer:A

9. You frequently enter text directly into InDesign via the Story Editor, and you often type so quickly that you type”Acme,Inc” instead of “Acme, Inc.”
What should you do?
A. You choose Edit > Spelling > Dynamic Spelling, which will alert you to every instance of the typo by placing a squiggly red underline beneath it.
B. You choose Edit > Spelling > Dictionary to open the Dictionary dialog, enter “Acme,Inc” in the Word field, and click the Add button
C. You open the Autocorrect pane of the Preferences dialog box and select the EnableAutocorrect checkbox. You then click the Add button, enter the incorrect and the correct spellings and click OK.
D. You apply to the comma in “Acme,Inc” a character style with a kerning value high enough to push the “Inc” a full space to the right.
Answer: C

10. What should you do to prevent a master page item from being overridden on a document page?
A. right-click (Ctrl+click with a one-button mouse) the item on the master page and from the contextual menu, select Lock Position
B. create a new layer, move the item to that layer and drag the layer to the bottom of the layer stack
C. right-click (Ctrl+click with a one-button mouse) the item on the master page and from the contextual menu,deselect Allow Master Item Overrides
D. create a new master page for that one item only and base the other master pages on that
Answer: C

http://www.test4actual.com

http://www.test4actual.com/9A0-086.html

http://blog.test4actual.com

Here are some practice about IBM 000-101 exam which are released by Test4actual,it provides a lot of IT certification exams,I hope they will help you pass your test.
Any doubts about the products quality left? Try the Test4actual 000-101 exam free demo before buy!

1. Which of the following statements is true regarding implementing Live Partition Mobility on two existing POWER6 based systems?
A.The systems must use internal storage for boot purposes.
B.All virtualized ethernet adapters must be numbered below 10.
C.The mobile partition’s network and disk access must be virtualized.
D.Each system must be controlled by a different Hardware Management Console (HMC).
ANSWER: C

2. Which of the following statements is true regarding virtual Ethernet redundancy?
A.Specifying an IP Address to ping is optional with Network Interface Backup (NIB) and is optional with Shared Ethernet Adapter (SEA) failover.
B.Specifying an IP Address to ping is optional with Network Interface Backup (NIB) and is required with Shared Ethernet Adapter (SEA) failover.
C.Specifying an IP Address to ping is required with Network Interface Backup (NIB) and is required with Shared Ethernet Adapter (SEA) Failover.
D.Specifying an IP Address to ping is required with Network Interface Backup (NIB) and is optional with Shared Ethernet Adapter (SEA) failover.
ANSWER: D

3. Which of the following can be used to re-deploy a system configuration in a disaster recovery scenario?
A.System plan
B.System profile
C.Critical console data
D.VIO server partition profile
ANSWER: A

4. A customer has 5 older POWER5 systems and they want to consolidate them onto a POWER6 system.
What information is important to analyze when deciding how to design the new machine using the System Planning Tool?
A.vmstat and iostat data from the older machines
B.The number of CPUs that were installed in the original machines
C.Data from Workload Estimator (WLE) and IBM Performance Management (PM)
D.Performance data that is collected from the new system after it has been put into production
ANSWER: C

5. The system administrator for a company plans to consolidate the workload of several ageing servers onto a new Power server.
The administrator’s intention is to virtualize all network and disk resources for each LPAR in the new system using VIOS 1.x.
Which of the following is correct regarding MAC addresses and World Wide Port Names (WWPN) in a client partition?
A.Each client LPAR will have its own MAC address and WWPN.
B.Each client LPAR will have no unique MAC address or WWPN.
C.Each client LPAR will have its own MAC address, but no unique WWPN.
D.Each client LPAR will have no unique MAC address, but will have its own WWPN.
ANSWER: C

http://www.test4actual.com/000-101.html

6. An administrator has a Power 570 in default configuration with a 4 port 1 Gbps Integrated Virtual Ethernet (IVE) adapter. A new application requires that the MCS value for the first port group of the IVE adapter be set to 1.
If this change is made, what is the maximum number of logical ports, across both port groups, that the IVE adapter can provide?
A.4
B.16
C.20
D.32
ANSWER: C

7. A company has a new Power 570. They will install 2 LPARs and 1 VIO server. All networking will be virtualized.Their application requires a large amount of bandwidth, and Link Aggregation on the VIO server will be utilized.They have 4 dual port gigabit Ethernet cards. The network infrastructure team has advised the implementation team that they are able to allocate 8 ports split between two switches, SwitchA and SwitchB.
How can Link Aggregation (LA) be configured for maximum possible bandwidth available for the LPARs?
A.Configure 2 LA devices, each containing 2 ports from SwitchA and 2 ports from SwitchB, no backup interfaces.
B.Configure 2 LA devices, each containing any 4 of the 8 available gigabit Ethernet interfaces and 1 backup interface.
C.Configure 1 LA device with all 8 gigabit Ethernet interfaces split between the two switches, and no backup interface.
D.Configure 2 LA devices, each containing 4 gigabit Ethernet interfaces connected to the same switch, no backup interfaces.
ANSWER: D

8. Which functionality would a customer use to share available CPU resources between AIX and Linux partitions on a Power system?
A.Dynamic LPAR
B.Micro Partitions
C.Entitled capacity
D.Multiple Shared Processor Pools
ANSWER: B

9. A customer is interested in server consolidation of their AIX and POWER Linux (SLES 10) environments and sees virtualization as an important component of this.Which of the following options provides the required virtualization and optimizes the use of the hardware?
A.A VIO server can provide virtualization capabilities of network and disk for both AIX and Linux clients.
B.A VIO server partition with the PowerVM Lx86 for x86 installed can provide virtualization capabilities of network and disk for both AIX and Linux clients.
C.A VIO Server partition can provide virtualization of network and disk for AIX clients. A separate Linux partition can provide virtualization of network and disk to Linux clients.
D.A VIO Server can provide virtualization of network and disk for AIX clients. A separate Linux partition running PowerVM Lx86 for x86 can provide virtualization capabilities of network and disk to Linux clients.
ANSWER: A

10. A customer has a requirement to provide VLAN tagging and a highly available network infrastructure for the logical partitions. A dual VIO server environment with Shared Ethernet Adapters (SEAs) is in place.
How can the customer support these requirements?
A.Create a SEA failover infrastructure with each having a Virtual Ethernet with a unique PVID mapping to a Virtual Ethernet on the LPAR with unique PVID.
B.Create a SEA failover infrastructure with each having a Virtual Ethernet with the same PVID mapping to a Virtual Ethernet on the LPAR with the same PVID.
C.Create a Network Interface Backup (NIB) infrastructure with each SEA having a Virtual Ethernet with the same PVID mapped to a Virtual Ethernet with the corresponding PVID on the LPAR.
D.Create a Network Interface Backup (NIB) infrastructure with each SEA having a Virtual Ethernet with a different PVID. Map one to a Virtual Ethernet with the corresponding PVID on the client LPAR.
ANSWER: B

http://www.test4actual.com

http://www.test4actual.com/000-101.html

http://www.hp-exam.com

I have passed the cisco 646-976 exam recently,if you are worried about it,maybe I can share some experience with you.A colleague of mine, who have got the Cisco certification, recommend Test4actual to me, saying that without the help of test4actual, he couldn’t have passed the exam.
Any doubts about the products quality left? Try the Test4actual 646-976 exam free demo before buy!

1.A software engineering firm wants to streamline call center operations to reduce customer wait times and improve employee productivity. Which Cisco solution best matches this business need?
A.optical network
B.IP telephony
C.WLAN
D.DSL
Correct:B

2.Which type of deployment utilizes ISRs with Cisco IOS Security feature sets to provide an ideal, low-cost,yet capable and powerful platform?
A.Small deployments
B.Large deployments
C.Medium deployments
D.Commercial deployments
E.Financial deployments
Correct:A

3.What does a router do?
A.stores data on the network and connects the local-area network (LAN) to the wide-area network (WAN)
B.routes traffic down alternative paths and connects the local-area network (LAN) to the wide-area network (WAN)
C.broadcasts data to all devices that are connected to it across the local-area network (LAN) and wide-area network(WAN)
D.reads Media Access Control (MAC) addresses to forward messages to the correct location and connects the local-area network (LAN) to the wide-area network (WAN)
Correct:B

4.What is the key element in SMB solutions?
A.They provide the lowest possible cost.
B.They reduce the cost and complexity associated with multiple services in a single device.
C.They reduce complexity by eliminating features.
D.Consumer-level products are suitable for SMB needs.
Correct:B

5.Which tool provides a complete guide that makes it easier for partners, regardless of their experience level, to sell Cisco Unified Communications solutions to their customers?
A.Solution Expert
B.Quote Builder
C.Sales Accelerator
D.Competitive Edge
E.Cisco Discovery
Correct:C

http://www.test4actual.com/646-976.html

6.What is a benefit of Internet protocol (IP) telephony?
A.synchronizes password exchanges for call setup
B.eliminates the need for physical cabling in a TCP/IP network
C.enables two-way voice transmission over a packet-switched TCP/IP network
D.creates an encrypted tunnel for voice through a Transmission Control Protocol (TCP)/IP network
Correct:C

7.What distinguishes IP telephony from standard analog telephony?
A.IP telephony uses IP addressing to provide a single dedicated path through a circuit-switched network.
B.IP telephony uses IP addressing to enable two-way voice transmission over a packet-switched TCP/IP network.
C.IP telephony uses TCP/IP to ensure that voice packets are given priority throughout the network so that conversations arrive intact.
D.IP telephony uses IP addressing to establish a single dedicated path through a packet-switched network.
Correct:B

8.You are a Cisco engineer of Pass4sure.com. As far as you know, which two of the following you will benefit from unified fabric? (Choose two.)
A.reduced I/O bandwidth
B.reduced throughput
C.reduction of server adapters required for I/O
D.reduced cabling
Correct:C D

9.You work as the network administrator at Pass4sure.com. Which of the following is correct if using the Cisco VFrame DC as a data center provisioning device?
A.Cisco VFrame DC can work only with the Nexus 7000 Series Switches.
B.Cisco VFrame DC can provision only network resources.
C.Cisco VFrame DC can work with VMware.
D.Cisco VFrame DC can work with the Catalyst 6500 Series Switches and the Nexus 7000 Series Switches but not with MDS.
Correct:C

10.You work as a Cisco engineer at Pass4sure.com. With your judgement, in the highly competitive networking switch market, which of the following can Cisco make that the competition cannot?
A.10 Gigabit Ethernet is available on all switches and line cards, and blade switches for both data networks and storage networks..
B.Cisco has blade server switches for both data networking and storage networking requirements.
C.Cisco has a commitment to using Ethernet as the backbone connection system for the data center.
D.Cisco supports modular switches and top-of-rack switches for both Gigabit Ethernet and 10 Gigabit Ethernet, and blade switches for both data networks and storage networks.
Correct:D

http://www.test4actual.com

http://www.test4actual.com/646-976.html

http://www.hp-exam.com

I have passed the IBM 000-377 exam recently,if you are worried about it,maybe I can share some experience with you.A colleague of mine, who have got the IBM certification, recommend Test4actual to me, saying that without the help of test4actual, he couldn’t have passed the exam.
Any doubts about the products quality left? Try the Test4actual IBM 000-377 exam free demo before buy!

FREE DEMO Download:http://exam.test4actual.com/000-377.pdf

http://www.test4actual.com

http://www.test4actual.com/000-377.html

http://www.hp-exam.com

“CCNA “, also known as 640-802 exam, is a Cisco certification.
Preparing for the 640-802 exam? Searching 640-802 Test Questions, 640-802 Practice Exam, 640-802 Dumps?

With the complete collection of questions and answers, Test4actual has assembled to take you through 173 Q&A to your 640-802 exam preparation. In the 640-802 exam resources, you will cover every field and category in CCNA helping to ready you for your successful Cisco Certification.

Free 640-802 Demo Download
Test4actual offers free demo for CCNA 640-802 exam (Cisco Certified Network Associate). You can check out the interface, question quality and usability of our practice exams before you decide to buy it. We are the only one site can offer demo for almost all products.

Exam Details
The CCNA exam is the qualifying exam available to candidates pursuing a single-exam option for the Cisco Certified Network Associate CCNA certification. The CCNA (640-802) exam will test materials from the new Interconnection Cisco Network Devices (ICND) course as well as the new Introduction to Cisco Networking Technologies (INTRO) course. The exam will certify that the successful candidate has important knowledge and skills necessary to select, connect, configure, and troubleshoot the various Cisco networking devices. The exam covers topics on Extending Switched Networks with VLANS, Determining IP Routes, Managing IP traffic with Access Lists, Establishing Point-to-Point connections, and Establishing Frame Relay Connections.

FREE DEMO Download:http://exam.test4actual.com/640-802.pdf

http://www.test4actual.com

http://www.test4actual.com/640-802.html

http://www.test4actual.org

“Cisco Others Certification “, also known as 646-561 exam, is a Cisco certification.
Preparing for the 646-561 exam? Searching 646-561 Test Questions, 646-561 Practice Exam, 646-561 Dumps?

With the complete collection of questions and answers, Test4actual has assembled to take you through 60 Q&A to your 646-561 exam preparation. In the 646-561 exam resources, you will cover every field and category in Cisco Others Certification helping to ready you for your successful Cisco Certification.

Free 646-561 Demo Download
Test4actual offers free demo for Cisco Others Certification 646-561 exam (Advanced Security for Account Manager(ASAM)). You can check out the interface, question quality and usability of our practice exams before you decide to buy it. We are the only one site can offer demo for almost all products.

Exam Details
The Cisco Others Certification exam is the qualifying exam available to candidates pursuing a single-exam option for the Cisco Certified Network Associate Cisco Others Certification certification. The Cisco Others Certification (646-561) exam will test materials from the new Interconnection Cisco Network Devices (ICND) course as well as the new Introduction to Cisco Networking Technologies (INTRO) course. The exam will certify that the successful candidate has important knowledge and skills necessary to select, connect, configure, and troubleshoot the various Cisco networking devices. The exam covers topics on Extending Switched Networks with VLANS, Determining IP Routes, Managing IP traffic with Access Lists, Establishing Point-to-Point connections, and Establishing Frame Relay Connections.

http://www.test4actual.com

FREE DEMO:
1.A hacker initiates an attack that floods the network, overwhelming the company server, router, firewall, or
network. Legitimate traffic cannot be processed, and the company cannot function. This causes which
security pain point?
A. DDoS attack
B. application security
C. theft of information
D. Day Zero attack
Answer:A

2.Which Cisco Security Solution helps organizations to effectively avoid disruptions that are caused by
worms or viruses, while also helping to control the costs of deploying and maintaining a secure network?
A. CiscoWorks VPN/Security Management Solution
B. Cisco Security Monitoring, Analysis and Response System
C. Theft of Information Solution
D. Outbreak Prevention Solution
Answer:D

3.NAC is an example of which principal characteristic of the Cisco SDN?
A. adaptation
B. collaboration
C. differentiation
D. integration
Answer:B

4.Once you have concluded the discovery process, you will set up a meeting with the final decision maker
and present the value proposition. Which two items would you include in your value proposition? (Choose
two.)
A. qualitative information about how Cisco can help to increase revenue and reduce costs
B. a high-level review of the Cisco Security portfolio and how it differs from competitive offerings
C. a detailed review of the proposed technological enhancements that are provided in the security solution
design
D. an analysis of the security-market business trends and related Cisco solution offerings
E. a review of customer security pain points and business needs that you learned about during the
discovery process
Answer:AE

5.No one buys security for security itself: customers must be able to realize the benefits. Which three
benefits can Cisco Security Solutions provide to customers? (Choose three.)
A. network convergence
B. increased profitability
C. zero percent of the network downtime
D. extended network access
E. compliance with government regulations
F. bandwidth optimization
Answer:BDE

http://www.test4actual.com

http://www.test4actual.com/646-561.html

http://www.hp-exam.com

“Cisco Others Certification “, also known as 646-391 exam, is a Cisco certification.
Preparing for the 646-391 exam? Searching 646-391 Test Questions, 646-391 Practice Exam, 646-391 Dumps?

With the complete collection of questions and answers, Test4actual has assembled to take you through 55 Q&A to your 646-391 exam preparation. In the 646-391 exam resources, you will cover every field and category in Cisco Others Certification helping to ready you for your successful Cisco Certification.

Free 646-391 Demo Download
Test4actual offers free demo for Cisco Others Certification 646-391 exam (Cisco Lifecycle Services Express(LCSE)). You can check out the interface, question quality and usability of our practice exams before you decide to buy it. We are the only one site can offer demo for almost all products.

Exam Details
The Cisco Others Certification exam is the qualifying exam available to candidates pursuing a single-exam option for the Cisco Certified Network Associate Cisco Others Certification certification. The Cisco Others Certification (646-391) exam will test materials from the new Interconnection Cisco Network Devices (ICND) course as well as the new Introduction to Cisco Networking Technologies (INTRO) course. The exam will certify that the successful candidate has important knowledge and skills necessary to select, connect, configure, and troubleshoot the various Cisco networking devices. The exam covers topics on Extending Switched Networks with VLANS, Determining IP Routes, Managing IP traffic with Access Lists, Establishing Point-to-Point connections, and Establishing Frame Relay Connections.

FREE DEMO:
1. In the implement phase, solution implementation involves which of the following task?
A. analyze high-level design and technology requirements of the customer
B. perform preliminary Site Assessment
C. configure core products
D. execute test cases
Answer: C

2. Network readiness assessment is an important service component in the plan phase. Which task is part
of network readiness assessment?
A. accounting for all advanced technology system assets and configurations
B. conducting a discovery workshop to gather data and initiate network implementation plan development
C. assessing current infrastructure and applications and their readiness to support proposed advanced
technology system
D. documenting network availability and redundancy requirements
E. developing Site Readiness Assessment Report
F. conducting Operations Readiness Assessment
Answer: C

3. In the implement phase, staging involves installation and testing the customer’s solution components in a
non-production lab environment. Which of the following defines the benefit to the partner?
A. Proper migration allows the customer to adopt the new hardware or software solution without an
unacceptable disruption of their network services.
B. A properly planned and executed Day 1 support plan improves the customer’s and their end-users’
satisfaction with theimplemented solution.
C. Staging validates that the system is operational to the customer and provides the customer with
increased confidence in the implemented system.
D. Staging validates the system and proactively identifies and resolves any network implementation issues.
It demonstrates to the customer that the partner will deploy a quality network in an efficient manner and
mitigates risk that the incorrect software or hardware is delivered to the installation site.
Answer: D

4. Which task is included in the systems migration service component of the implement phase?
A. customize Ongoing Support Hand-off Kit
B. execute the Network Migration Plan
C. monitor the system to identify occurrences of service-level metrics dropping below a defined threshold
D. provide onsite technical support per Implementation Plan
Answer: B

5. During the implement phase, systems acceptance testing does which of the following for the customer?
A. installs, configures, tests, and commissions tools and processes in accordance with the operations
implementation plan
B. provides information indicating the customer-specific design requirements and configurations
C. executes the migration plan by migrating network services from an existing state to a future state
D. provides an objective means of measuring system operability and functionality
Answer: D

http://www.test4actual.com

http://www.test4actual.com/646-391.html

http://blog.test4actual.com

“IP Communications “, also known as 642-104 exam, is a Cisco certification.
Preparing for the 642-104 exam? Searching 642-104 Test Questions, 642-104 Practice Exam, 642-104 Dumps?

With the complete collection of questions and answers, Test4actual has assembled to take you through 70 Q&A to your 642-104 exam preparation. In the 642-104 exam resources, you will cover every field and category in IP Communications helping to ready you for your successful Cisco Certification.

Free 642-104 Demo Download
Test4actual offers free demo for IP Communications 642-104 exam (Unified Communication for System Engineers Exam). You can check out the interface, question quality and usability of our practice exams before you decide to buy it. We are the only one site can offer demo for almost all products.

Exam Details
The IP Communications exam is the qualifying exam available to candidates pursuing a single-exam option for the Cisco Certified Network Associate IP Communications certification. The IP Communications (642-104) exam will test materials from the new Interconnection Cisco Network Devices (ICND) course as well as the new Introduction to Cisco Networking Technologies (INTRO) course. The exam will certify that the successful candidate has important knowledge and skills necessary to select, connect, configure, and troubleshoot the various Cisco networking devices. The exam covers topics on Extending Switched Networks with VLANS, Determining IP Routes, Managing IP traffic with Access Lists, Establishing Point-to-Point connections, and Establishing Frame Relay Connections.

http://www.test4actual.com

FREE DEMO:
1. What is the correct procedure for adding a new a subscriber on a Cisco Unity for Domino system?
A. You create the subscriber through the Cisco Unity System Administrator and Cisco Unity creates the
Domino account.
B. You confirm the person has a Domino account and import them into Cisco Unity through the Cisco Unity
System Administrator.
C. You confirm your Cisco Unity System Administrator Account has the correct class of service rights to add
accounts in Domino.
D. You confirm the Cisco Unity For Domino connector is functioning and create the subscriber through the
Cisco Unity System Administrator
Answer: B

2. Your client would like to be able to back up and restore the entire Cisco Unity server, including the
operating system and SQL database, in case of a catastrophic failure of the Cisco Unity server. Which
Cisco Unity or third-party utility would you tell them to use?
A. Cisco Unity Disaster Recovery Backup and Restore utilities
B. Symantec/Veritas Backup Exec
C. Cisco Unity Disaster Recovery Backup and Restore utilities with full backup options selected
D. Cisco Unity Database Recovery tool
Answer: C

3. As the administrator of a Cisco Unity messaging system, you have been asked to provide information on
the number and length of call placed by the Unity system to subscribers for message notification during the
past seven days.
Which report do you run to accomplish this task?
A. Outcall Billing
B. Notification Billing
C. Transfer Call Billing
D. Subscriber Message Activity
Answer: A

4. A customer is answering questions in an Interview Box. The caller, when prompted to enter his telephone
number, entered touch tones rather than speaking the telephone number.
What does Cisco Unity do with that answer?
A. Cisco Unity plays it back as touch tones.
B. Cisco Unity hangs up on the caller when the touch tones are entered.
C. Cisco Unity interprets the touch tones and speaks the number entered.
D. Cisco Unity tries to transfer to an extension if it matches any of the touch tones entered.
Answer: A

5. Your client has used the Cisco Unity Disaster Recovery Backup utility to back up the Cisco Unity version
4.0(3) Unified Messaging server. The client has decided to perform the restore to a new server installed
with Cisco Unity version 4.0(4). Which statement is true?
A. The restore will be successful only if the new server meets the same Platform Overlay requirements as
the backed-up server.
B. The restore will fail because the Cisco Unity version level must remain consistent between the old and
new servers.
C. The restore will fail unless Cisco Unity is licensed for such an upgrade.
D. The restore will be successful only if the old and new servers both have SQL, but not MSDE, installed.
Answer: B

http://www.test4actual.com

http://www.test4actual.com/642-104.html

http://www.hp-exam.com

“CCSP “, also known as 642-513 exam, is a cisco certification.
Preparing for the 642-513 exam? Searching 642-513 Test Questions, 642-513 Practice Exam, 642-513 Dumps?

With the complete collection of questions and answers, Test4actual has assembled to take you through 69 Q&A to your 642-513 exam preparation. In the 642-513 exam resources, you will cover every field and category in CCSP helping to ready you for your successful Cisco Certification.

Free 642-513 Demo Download
Test4actual offers free demo for CCSP 642-513 exam (Securing Hosts Using Cisco Security Agent Exam (HIPS)). You can check out the interface, question quality and usability of our practice exams before you decide to buy it. We are the only one site can offer demo for almost all products.

Exam Details
The CCSP exam is the qualifying exam available to candidates pursuing a single-exam option for the Cisco Certified Network Associate CCSP certification. The CCSP (642-513) exam will test materials from the new Interconnection Cisco Network Devices (ICND) course as well as the new Introduction to Cisco Networking Technologies (INTRO) course. The exam will certify that the successful candidate has important knowledge and skills necessary to select, connect, configure, and troubleshoot the various Cisco networking devices. The exam covers topics on Extending Switched Networks with VLANS, Determining IP Routes, Managing IP traffic with Access Lists, Establishing Point-to-Point connections, and Establishing Frame Relay Connections.

http://www.test4actual.com

FREE DEMO:
1. Which of these is a reason for using groups to administer Agents?
A. to link similar devices together
B. to complete configuration changes on groups instead of hosts
C. to complete the same configuration on like items
D. to apply the same policy to hosts with similar security requirements
Answer: D

2. Which three items make up rules? (Choose three.)
A. variables
B. applications
C. application classes
D. rule modules
E. policies
F. actions
Answer: ACF

3. Which action do you take when you are ready to deploy your CSA configuration to systems?
A. select
B. clone
C. deploy
D. generate rules
Answer: D

4. Which one of the five phases of an attack attempts to become resident on a target?
A. probe phase
B. penetrate phase
C. persist phase
D. propagate phase
E. paralyze phase
Answer: C

5. What is the purpose of the Audit Trail function?
A. to generate a report listing events matching certain criteria, sorted by event severity
B. to generate a report listing events matching certain criteria, sorted by group
C. to generate a report showing detailed information for selected groups
D. to display a detailed history of configuration changes
Answer: D

http://www.test4actual.com

http://www.test4actual.com/642-513.html

http://www.hp-exam.com

Here are some practice about Cisco 640-553 exam which are latest released by Test4actual,it provides a lot of IT certification exams,I hope they will help you pass your test.

1.Which consideration is important when implementing Syslogging in your network?
A.Use SSH to access your Syslog information.
B.Enable the highest level of Syslogging available to ensure you log all possible event messages.
C.Log all messages to the system buffer so that they can be displayed when accessing the router.
D.Syncronize clocks on the network with a protocol such as Network Time Protocol.
Answer:D

2.Which statement is true when you have generated RSA keys on your Cisco router to prepare for secure device management?
A.You must then zeroize the keys to reset secure shell before configuring other parameters.
B.The SSH protocol is automatically enabled.
C.You must then specify the general-purpose key size used for authentication with the crypto key generate rsa general-keys modulus command.
D.All vty ports are automatically enabled for SSH to provide secure management.
Answer:B

3.What does level 5 in the following enable secret global configuration mode command indicate? router#enable secret level 5 password
A.The enable secret password is hashed using MD5.
B.The enable secret password is hashed using SHA.
C.The enable secret password is encrypted using Cisco proprietary level 5 encryption.
D.Set the enable secret command to privilege level 5.
E.The enable secret password is for accessing exec privilege level 5.
Answer:E

4.Which of these correctly matches the CLI command(s) to the equivalent SDM wizard that performs similar configuration functions?
A.Cisco Common Classification Policy Language configuration commands and the SDM Site-to-Site VPN wizard
B.auto secure exec command and the SDM One-Step Lockdown wizard
C.setup exec command and the SDM Security Audit wizard
D.class-maps, policy-maps, and service-policy configuration commands and the SDM IPS wizard
E.aaa configuration commands and the SDM Basic Firewall wizard
Answer:B

5.What is the key difference between host-based and network-based intrusion prevention?
A.Network-based IPS is better suited for inspection of SSL and TLS encrypted data flows.
B.Network-based IPS provides better protection against OS kernel-level attacks against hosts and servers.
C.Network-based IPS can provide protection to desktops and servers without the need of installing specialized software on the end hosts and servers.
D.Host-based IPS can work in promiscuous mode or inline mode.
E.Host-based IPS is more scalable then network-based IPS.
F.Host-based IPS deployment requires less planning than network-based IPS.
Answer:C

http://www.test4actual.com/640-553.html

6.Refer to the exhibit. You are a network manager for your organization. You are looking at your Syslog server reports. Based on the Syslog message shown, which two statements are true? (Choose two.)
A.Service timestamps have been globally enabled.
B.This is a normal system-generated information message and does not require further investigation.
C.This message is unimportant and can be ignored.
D.This message is a level 5 notification message.
Answer:A D

7.You suspect an attacker in your network has configured a rogue layer 2 device to intercept traffic from multiple VLANS, thereby allowing the attacker to capture potentially sensitive data. Which two methods will help to mitigate this type of activity? (Choose two.)
A.Turn off all trunk ports and manually configure each VLAN as required on each port
B.Disable DTP on ports that require trunking
C.Secure the native VLAN, VLAN 1 with encryption
D.Set the native VLAN on the trunk ports to an unused VLAN
E.Place unused active ports in an unused VLAN
Answer:B D

8.Which three statements about SSL-based VPNs are true? (Choose three.)
A.Asymmetric algorithms are used for authentication and key exchange.
B.SSL VPNs and IPsec VPNs cannot be configured concurrently on the same router.
C.Symmetric algorithms are used for bulk encryption.
D.The authentication process uses hashing technologies.
E.SSL VPNs require special-purpose client software to be installed on the client machine.
F.You can also use the application programming interface to extensively modify the SSL client software for use in special applications.
Answer:A C D

9.When configuring AAA login authentication on Cisco routers, which two authentication methods should be used as the final method to ensure that the administrator can still log in to the router in case the external AAA server fails? (Choose two.)
A.group RADIUS
B.group TACACS+
C.local
D.krb5
E.enable
F.if-authenticated
Answer:C E

10.What is a result of securing the Cisco IOS image using the Cisco IOS image resilience feature?
A.The show version command will not show the Cisco IOS image file location.
B.The Cisco IOS image file will not be visible in the output from the show flash command.
C.When the router boots up, the Cisco IOS image will be loaded from a secured FTP location.
D.The running Cisco IOS image will be encrypted and then automatically backed up to the NVRAM.
E.The running Cisco IOS image will be encrypted and then automatically backed up to a TFTP server.
Answer:B

http://www.test4actual.com

http://www.test4actual.com/640-553.html

http://www.hp-exam.com

“Wireless LAN “, also known as 642-586 exam, is a cisco certification.
Preparing for the 642-586 exam? Searching 642-586 Test Questions, 642-586 Practice Exam, 642-586 Dumps?

With the complete collection of questions and answers, Test4actual has assembled to take you through 70 Q&A to your 642-586 exam preparation. In the 642-586 exam resources, you will cover every field and category in Wireless LAN helping to ready you for your successful Cisco Certification.

Free 642-586 Demo Download
Test4actual offers free demo for Wireless LAN 642-586 exam (Advanced Wireless LAN for System Engineers). You can check out the interface, question quality and usability of our practice exams before you decide to buy it. We are the only one site can offer demo for almost all products.

Exam Details
The Wireless LAN exam is the qualifying exam available to candidates pursuing a single-exam option for the Cisco Certified Network Associate Wireless LAN certification. The Wireless LAN (642-586) exam will test materials from the new Interconnection Cisco Network Devices (ICND) course as well as the new Introduction to Cisco Networking Technologies (INTRO) course. The exam will certify that the successful candidate has important knowledge and skills necessary to select, connect, configure, and troubleshoot the various Cisco networking devices. The exam covers topics on Extending Switched Networks with VLANS, Determining IP Routes, Managing IP traffic with Access Lists, Establishing Point-to-Point connections, and Establishing Frame Relay Connections.

http://www.test4actual.com

FREE DEMO:
1. Which three key features are unique to the Cisco wireless autonomous access points and WLSE
management? (Choose three.)
A. rogue access point detection
B. fast secure roaming via CCKM
C. fast secure roaming via WPA2 PKC
D. local authentication via access point
E. client participation in RF management
F. access point participation in RF management
Answer: BDE
2. A wireless using core feature set products uses which protocol for radio management?
A. CCKM
B. LWAPP
C. SNMP
D. WLCCP
Answer: D
3. The wireless core feature set uses which protocol to facilitate fast secure roaming?
A. CCKM
B. LWAPP
C. SNMP
D. WLCCP
Answer: A
4. The wireless advanced feature set uses which protocol for communication between the access point and
the controller?
A. WLCCP
B. SNMP
C. LWAPP
D. CCKM
http://www.test4actual.com
Answer: C
5.Which two key features are unique to the wireless advanced feature set using lightweight access points?
(Choose two.)
A. fast secure roaming
B. rogue access point detection
C. access point participation in RF management
D. dynamic RF control without advanced management
E. access point registration via digital certificate
Answer: DE

http://www.test4actual.com

http://www.test4actual.com/642-586.html

http://www.hp-exam.com

“CCVP IP Communications “, also known as 642-444 exam, is a Cisco certification.
Preparing for the 642-444 exam? Searching 642-444 Test Questions, 642-444 Practice Exam, 642-444 Dumps?

With the complete collection of questions and answers, Test4actual has assembled to take you through 65 Q&A to your 642-444 exam preparation. In the 642-444 exam resources, you will cover every field and category in CCVP IP Communications helping to ready you for your successful Cisco Certification.

Free 642-444 Demo Download
Test4actual offers free demo for CCVP IP Communications 642-444 exam (IP Telephony Exam (CIPT)). You can check out the interface, question quality and usability of our practice exams before you decide to buy it. We are the only one site can offer demo for almost all products.

Exam Details
The CCVP IP Communications exam is the qualifying exam available to candidates pursuing a single-exam option for the Cisco Certified Network Associate CCVP IP Communications certification. The CCVP IP Communications (642-444) exam will test materials from the new Interconnection Cisco Network Devices (ICND) course as well as the new Introduction to Cisco Networking Technologies (INTRO) course. The exam will certify that the successful candidate has important knowledge and skills necessary to select, connect, configure, and troubleshoot the various Cisco networking devices. The exam covers topics on Extending Switched Networks with VLANS, Determining IP Routes, Managing IP traffic with Access Lists, Establishing Point-to-Point connections, and Establishing Frame Relay Connections.

FREE DEMO Download:http://exam.test4actual.com/642-444.pdf

http://www.test4actual.com

http://www.test4actual.com/642-444.html

http://blog.test4actual.com